old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: Fazerjon on 25 March 2012, 07:49:03 pm

Title: FZ1 fuelling issue.
Post by: Fazerjon on 25 March 2012, 07:49:03 pm

Ive just fitted a Mivv Titanium gp end can and link pipe to my 2011 FZ1N. The throttle is still slightly snatchy when throttling from off to on. Somebody mentioned an electronic box gizmo (not power commander) that you can plug in which is supposed to reduce this. Any recommendations as to which one and where to get one from??  :rolleyes

Title: Re: FZ1 fuelling issue.
Post by: Bracechenko on 25 March 2012, 08:27:39 pm

Are you thinking of Ivan's FCE (Fuel cutoff eliminator)?

This helps to eliminate the snatchyness associated with the FZ1

Title: Re: FZ1 fuelling issue.
Post by: Fazerjon on 25 March 2012, 08:34:18 pm

Aaah, yes that sounds like the bit I'm after. Can you recommend a good place to get one??

Title: Re: FZ1 fuelling issue.
Post by: Bracechenko on 25 March 2012, 08:51:28 pm

Ummm....not sure really soz. My FZ-1 had already had the mod done when I bought it.

You could start here... http://www.ivansperformanceproducts.com/fce.htm (http://www.ivansperformanceproducts.com/fce.htm)

I'm sure someone will come along who's a little more helpful!

Title: Re: FZ1 fuelling issue.
Post by: locksmith on 26 March 2012, 02:37:12 pm

http://www.sgmotorsport.co.uk/ (http://www.sgmotorsport.co.uk/)   uk distributor
 
They are also on ebay http://www.ebay.co.uk/itm/Yamaha-FZ1-Fazer-1000-Ivans-Fuel-Cut-Eliminator-FCE001-/110807558549?pt=UK_Motorcycle_Parts&hash=item19cca52995 (http://www.ebay.co.uk/itm/Yamaha-FZ1-Fazer-1000-Ivans-Fuel-Cut-Eliminator-FCE001-/110807558549?pt=UK_Motorcycle_Parts&hash=item19cca52995)

Title: Re: FZ1 fuelling issue.
Post by: Fazerjon on 06 June 2012, 12:39:39 pm

Thanks. Just ordered Ivans Fuel Cut Eliminator..... will post on verdict as soon as it arrives and I've fitted it........... :)