old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: slinky2000 on 22 May 2017, 11:03:45 am

Title: Removal/Replacement side/kick stand switch
Post by: slinky2000 on 22 May 2017, 11:03:45 am

Can someone tell me how to remove the side/kick stand switch?


I can get the outter screw off but I cannot get to the inner screw.  It looks like the sump or downpipes are in the way.


Am I missing something? The Haynes manual doesn't mention there to be any issues, it just says 'remove the two screws'

Title: Re: Removal/Replacement side/kick stand switch
Post by: slinky2000 on 22 May 2017, 11:08:24 am

:( ah man, I just read this


http://foc-u.co.uk/index.php/topic,21149.msg242805.html (http://foc-u.co.uk/index.php/topic,21149.msg242805.html)


and found this


http://foc-u.co.uk/index.php?action=downloads;sa=view;down=66 (http://foc-u.co.uk/index.php?action=downloads;sa=view;down=66)




Talk about a C**t of a job for such a simple switch

Title: Re: Removal/Replacement side/kick stand switch
Post by: Dave48 on 22 May 2017, 04:42:15 pm

If the job is such a pig like this one usually the Haynes Book doesnt cover it. But as usual the Fazer Forum has a way!
PS So far I just keep mine free of grease & road crud & spray liberally with GT85. Coincidentally my clutch switch failed yesterday(part of the safety interlock) & the part is £38 from Yamaha! :eek

Title: Re: Removal/Replacement side/kick stand switch
Post by: bikemad on 22 May 2017, 06:59:55 pm

I have got a sidestand switch if it helps you out.
[/size][size=78%]But sidestand would require removal of the exhaust to get at it,the two I took off where long after the whole bike was stripped & they where still a cnut to get at covered with crud ![/size]

Title: Re: Removal/Replacement side/kick stand switch
Post by: slinky2000 on 23 May 2017, 10:31:45 am

Thanks but I have a switch, it wasn't until I went to replace it I realised it wasn't as easy as haynes suggested.