old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: Grant1Shepherd on 27 April 2017, 08:04:38 pm

Title: Renthal bar ends
Post by: Grant1Shepherd on 27 April 2017, 08:04:38 pm
Hi guys


Bike is getting some renthal bars next week to replace my bent stock one's, however I've heard to original bar ends don't fit them???


Does anyone know what bar ends do fit and if so could you supply any links?


I seen bar ends with mirrors however then I'm wondering how do I fill the gaps in the front fairing for the fairing mirrors?


Hope you can all help :)
Title: Re: Renthal bar ends
Post by: jimjenko on 27 April 2017, 08:11:33 pm
The internal diameter of renthals is 13mm

http://foc-u.co.uk/index.php?topic=10456.0 (http://foc-u.co.uk/index.php?topic=10456.0)

I wouldnt recommend bar ends with mirrors unless you streetfighter her
Title: Re: Renthal bar ends
Post by: Arfa on 27 April 2017, 09:59:09 pm
Got some R&G bar ends in my Renthals, like these ones. (https://rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&toolid=11800&pub=5574962995&campid=5337246854&mpre=http%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FR-G-Racing-One-Pair-Bar-End-Weight-Sliders-for-Renthal-Bars-%2F322387066039%3Fhash%3Ditem4b0fc43cb7%3Ag%3AvskAAOSw44BYdijj)
Title: Re: Renthal bar ends
Post by: Grant1Shepherd on 28 April 2017, 10:16:03 pm
Quote from: Arfa on 27 April 2017, 09:59:09 pm
Got some R&G bar ends in my Renthals, like these ones. (https://rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&toolid=11800&pub=5574962995&campid=5337246854&mpre=http%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FR-G-Racing-One-Pair-Bar-End-Weight-Sliders-for-Renthal-Bars-%2F322387066039%3Fhash%3Ditem4b0fc43cb7%3Ag%3AvskAAOSw44BYdijj)

Are they 13mm?
Title: Re: Renthal bar ends
Post by: Jbizzle on 28 April 2017, 10:16:42 pm
I used these


http://www.ebay.co.uk/itm/Oxford-Motorcycle-Slim-Flat-Bar-Ends-End-Weights-2-BLACK-13mm-22mm-Handlebars-/191993697066?_trksid=p2385738.m2548.l4275 (http://www.ebay.co.uk/itm/Oxford-Motorcycle-Slim-Flat-Bar-Ends-End-Weights-2-BLACK-13mm-22mm-Handlebars-/191993697066?_trksid=p2385738.m2548.l4275)


They are quite thin which is good, as renthals tend to be wider than the OEM and therefore hamper filtering.


No point sticking and extra couple of inches of bar end to them. Plus the above look quiet neat and flush with the OEM grips.