old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: Dustydes on 31 March 2017, 05:43:17 pm

Title: Carbs
Post by: Dustydes on 31 March 2017, 05:43:17 pm

Did the carbs remain the same on all Gen 1 1000's UK spec

Title: Re: Carbs
Post by: ste131 on 31 March 2017, 08:17:30 pm

Same part number for all Gen 1's so should be the same. 5LV-14900-00

Title: Re: Carbs
Post by: PieEater on 31 March 2017, 08:26:29 pm

No there were some changes around 2003 Mike (Falcon 269) would be the best person to advise I think it's to do with the jetting / needles.

Title: Re: Carbs
Post by: Falcon 269 on 31 March 2017, 08:52:37 pm

Essentially the same - the only minor change was an increase in the size of the needle spacer from 2003 onwards.  Went from 2.5mm to 3.0mm which is only of significance if you decide to making jetting changes. :)

Title: Re: Carbs
Post by: Dustydes on 01 April 2017, 08:09:02 am

Thanks


Was thinking of going full monty but might upgrade next year to newer Gen1 so could swap carbs and keep mods.