old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: slinky2000 on 28 March 2017, 11:52:38 am

Title: Should I be able to start the bike in gear with the clutch pulled in?
Post by: slinky2000 on 28 March 2017, 11:52:38 am: I'm pretty sure I used to be able to do this but it's not working at the moment.

If I'm in first gear (side stand up) and stall the bike, If I pull in the clutch, should I be able to start the bike?

At the moment if I do, the lights on the dash dim but it doesn't start, I have to put it into neutral and then start.

This is a bit of a pain at light sometimes.

Thanks.
Title: Re: Should I be able to start the bike in gear with the clutch pulled in?
Post by: joebloggs on 28 March 2017, 11:58:54 am: Quote from: slinky2000 on 28 March 2017, 11:52:38 am
I'm pretty sure I used to be able to do this but it's not working at the moment.

If I'm in first gear (side stand up) and stall the bike, If In pull in the clutch should I be able to start the bike?

At the moment if I do the lights on the dash dim but it doesn't start, I have to put it into neutral and then start.

This is a bit of a pain at light sometimes.

Thanks.

Sidestand switch?
Title: Re: Should I be able to start the bike in gear with the clutch pulled in?
Post by: slinky2000 on 28 March 2017, 12:11:32 pm: Quote from: joebloggs on 28 March 2017, 11:58:54 am

Sidestand switch?

Actually should I be able to start the bike when on the side stand and in neutral? Because I can't do that either.
Title: Re: Should I be able to start the bike in gear with the clutch pulled in?
Post by: Grayo on 28 March 2017, 12:19:11 pm: Quote from: slinky2000 on 28 March 2017, 12:11:32 pm
Quote from: joebloggs on 28 March 2017, 11:58:54 am

Sidestand switch?

Actually should I be able to start the bike when on the side stand and in neutral? Because I can't do that either.
Yes you should. Faulty sidestand switch you have there.
Title: Re: Should I be able to start the bike in gear with the clutch pulled in?
Post by: slinky2000 on 28 March 2017, 12:21:58 pm: Perfect, I've already got one in the house. I'll fit it and see what happens.
Title: Re: Should I be able to start the bike in gear with the clutch pulled in?
Post by: Jules-C on 28 March 2017, 01:44:34 pm: The switch is a right **** to change. I ended up cutting the old one to pieces to remove it. Sometimes a good spray with wd40 or similar can get it working again

The lights shouldn't dim when you try and start it in gear since no power is going to the starter motor but from the other symptoms sounds like it is the sidestand switch.
Title: Re: Should I be able to start the bike in gear with the clutch pulled in?
Post by: joebloggs on 28 March 2017, 03:06:03 pm: Quote from: Jules-C on 28 March 2017, 01:44:34 pm
The switch is a right **** to change. I ended up cutting the old one to pieces to remove it. Sometimes a good spray with wd40 or similar can get it working again

The lights shouldn't dim when you try and start it in gear since no power is going to the starter motor but from the other symptoms sounds like it is the sidestand switch.

Bypass the focer, please remember to raise it before setting off
Title: Re: Should I be able to start the bike in gear with the clutch pulled in?
Post by: darrsi on 28 March 2017, 04:44:59 pm: Quote from: joebloggs on 28 March 2017, 03:06:03 pm
Quote from: Jules-C on 28 March 2017, 01:44:34 pm
The switch is a right **** to change. I ended up cutting the old one to pieces to remove it. Sometimes a good spray with wd40 or similar can get it working again

The lights shouldn't dim when you try and start it in gear since no power is going to the starter motor but from the other symptoms sounds like it is the sidestand switch.

Bypass the focer, please remember to raise it before setting off

That's what i ended up doing, it's in a ridiculously bad place to access.