old - Fazer Owners Club - old
Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: drew70311 on 11 March 2017, 08:07:49 am
-
Hello you wonderful Foccers...
Ive just become the happy owner of a Gen 1 2004... But ! The exup is valve is completely missing, with blanking plates in place.
Does anyone have a complete one for sale or headers inc valve?
Thanks in advance !
-
Hi There
as an aside ..some foccers have bought R1 headers off ebay as some not all years exup fit ours too..
Good luck :)
-
That's interesting to know, any idea what R1 year I'd be looking for?
-
R1 98-01 4xv, the headers won't fit but the exup valve is a straight swap, I had the same problem with my bike someone had removed the whole thing & just left the front plate on !
-
Fantastic.... I knew I could count you lot :)
-
Just as a curiosity have any other mods been done? I'm not 100% sure how it works with a gen1 but I'd assume the person that removed it did so for some kind of power increase so maybe they've modified a few other bits to make it work without? Or does it suffer from a loss of low down power?
-
There's one on ebay original fazer , £32 plus £20 post from United States, worth a look item number 401287767923
-
Great thanks I'll have a look.
The cables are still there tie wrapped to the frame ?!?!
And there is a noticeable flat spot below 3k that has been helped marginally by putting baffle in the Beowulf end can.
I'd hope there'll be no flat spot if I was to replace the valve I'm going to get the tank off tonight and do some digging, to see I'd there are any other unknown modifications
-
I've had a look at the american valve, looks a good deal for someone, I'm missing everything though, I'd need the cover, cable guiders spacers etc etc as well so looking for headers with it still on
-
She's a looker though ;)