old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: Andy W on 21 January 2017, 11:33:02 pm

Title: Valve Clearance Check
Post by: Andy W on 21 January 2017, 11:33:02 pm

Argh!
Got it done but that valve clearance check is pure:evil !

Hours of work to find out that something is actually fine!  :\
Oh well, at least it's only every 25K!

Title: Re: Valve Clearance Check
Post by: Simon.Pieman on 22 January 2017, 12:27:15 pm

I'll suspect there are rather a lot of owners who will never check them, myself included (84,000 miles up and not checked). Most mechanics will tell you that these 5 valve Yamaha heads will stay in service for the life of most of the bikes.
I read that there's some women in the States who had her first check at something over 200,000 miles and just one  valve was on the cusp of needing a reshim. Impressive.

Title: Re: Valve Clearance Check
Post by: Andy W on 24 January 2017, 04:39:22 pm

Quote from: Simon.Pieman on 22 January 2017, 12:27:15 pm

I'll suspect there are rather a lot of owners who will never check them, myself included (84,000 miles up and not checked). Most mechanics will tell you that these 5 valve Yamaha heads will stay in service for the life of most of the bikes.
I read that there's some women in the States who had her first check at something over 200,000 miles and just one  valve was on the cusp of needing a reshim. Impressive.

Now you tell me...!  :rolleyes :'( :lol

Title: Re: Valve Clearance Check
Post by: PieEater on 24 January 2017, 07:04:31 pm

Quote from: Simon.Pieman on 22 January 2017, 12:27:15 pm

I read that there's some women in the States who had her first check at something over 200,000 miles and just one  valve was on the cusp of needing a reshim. Impressive.

Not quite correct you can download her service log here http://fz1grl.net/2012/03/fz1_maintenance/ (http://fz1grl.net/2012/03/fz1_maintenance/)

Scanning down the post on the linked page she says about her valve checks "I did the 1st one at 26k, the 2nd around 52k and then didn’t do one until 162k and only the 2 exhaust valves needed adjusting but even then they were still within spec. Haven’t done one since and am now at 219k."

But yes,  impressive all the same.

Title: Re: Valve Clearance Check
Post by: markie_wales on 25 January 2017, 09:53:05 am

That is impressive. My take on these is that if they are in spec, they are in spec. I never change if in spec even if others want it in the middle of spec range. It could stay within spec for a lot more years and it is IN SPEC 😄

Cheers

Markie

Title: Re: Valve Clearance Check
Post by: Andy W on 25 January 2017, 06:00:03 pm

Quote from: markie_wales on 25 January 2017, 09:53:05 am

That is impressive. My take on these is that if they are in spec, they are in spec. I never change if in spec even if others want it in the middle of spec range. It could stay within spec for a lot more years and it is IN SPEC 😄

Cheers

Markie

Hear Hear!  :)