old - Fazer Owners Club - old
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: Robfzs on 15 March 2012, 04:40:12 pm
-
Hi,i wanna replace all the old rubber lines with stainless braided hoses and change all the pads while i'm doing it
any lines/pads people reccomend ? thanks
-
I got front and rear HEL lines off eBay last year, about £45, not sure of the seller but Mr Brakelines rings a bell. Make sure they've got stainless bolts/ends and not Zinc plated. I fitted the "racing" setup to the front which is two lines straight out of the master cylinder, was cheaper than 1into2 through the splitter at the time and works just as well (also less chance of leaks).
Can't remember where I got the seals from, generics off eBay I think. If you go that route make sure you read the listings properly though, from memory there are plenty of sellers that are creative with their advertising and don't sell you a full set.
To rebuild the standard calipers you need the following seals:
Front; large dust x4, large fluid x4, small dust x4, small fluid x4 (x2 of each type of pot per caliper)
Back; dust x2, fluid x2
You also need quite a lot of patience when it comes to bleeding the new system
-
i was really impressed with Wezmoto brake lines
-
i was really impressed with Wezmoto brake lines
Had you just fitted these? If yes was wondering how you were getting on with them.
-
i was really impressed with Wezmoto brake lines
Had you just fitted these? If yes was wondering how you were getting on with them.
HAd them for a few months... im impressed with the quality and they work sh%t hot :D
-
thanks guys,any pads people recomend aswell ? cheers :)
-
Got the HEL racing set up 2yrs ago. Still work - but had an awkward time fitting at the front. One of the banjos didn't seem to be the right way round... but rather than complain struggled and then managed to get it on in the end!
As to pads - EBC HH. Hardly any wear of pads or discs since fitting with the lines.
As these are the only lines and pads I have ever bought - and they seem to work - they are the only ones I can recommend them!
-
hi got a hel brake line kit and ebc pad set off bikebits ni in bangor Northern Ireland :thumbup cannot fault them at all bargain with him an maybe get a bit off postage :b
-
sorry to be a pain,anyone got a link to the kits they bought? thanks again!
-
Turns out I paid £60 for my kit:
http://www.ebay.co.uk/itm/Yamaha-FZS600-Fazer-98-03-F-R-Stainless-Brake-Line-Kit-/180471666426?pt=UK_Motorcycle_Parts&hash=item2a04f316fa (http://www.ebay.co.uk/itm/Yamaha-FZS600-Fazer-98-03-F-R-Stainless-Brake-Line-Kit-/180471666426?pt=UK_Motorcycle_Parts&hash=item2a04f316fa)
Ebay search:
http://www.ebay.co.uk/sch/i.html?_trkparms=65%253A12%257C66%253A2%257C39%253A1%257C72%253A6003&rt=nc&_nkw=yamaha+fzs+600+brake+line&_dmpt=UK_Motorcycle_Parts&_trksid=p3286.c0.m14&_sop=15&_sc=1 (http://www.ebay.co.uk/sch/i.html?_trkparms=65%253A12%257C66%253A2%257C39%253A1%257C72%253A6003&rt=nc&_nkw=yamaha+fzs+600+brake+line&_dmpt=UK_Motorcycle_Parts&_trksid=p3286.c0.m14&_sop=15&_sc=1)