Fazer Owners Club - Unofficial

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: bryaneidins on 28 November 2016, 01:04:17 pm

Title: Tank fixings
Post by: bryaneidins on 28 November 2016, 01:04:17 pm

Hi Guys,


Where the petrol tank bolts down at the front of the bike, is there meant to be any sort of rubber between the tank lug and the frame work?


Kind Regards
Bryan

Title: Re: Tank fixings
Post by: andybesy on 28 November 2016, 01:23:18 pm

No not at the front. There are big chunky rubber mounts under the tank where it sits on the main frame, but at the front the protruding lug bolts directly to the frame, no rubber washer or similar.

Remember it only needs to be nipped up, don't lean on that one.

Andy

Title: Re: Tank fixings
Post by: Bretty on 28 November 2016, 03:19:29 pm

Quote from: andybesy on 28 November 2016, 01:23:18 pm

....

Remember it only needs to be nipped up, don't lean on that one.

Andy

This is true. The thread is knackered on mine. if i ever come off, no doubt the tank will also come off and cover me in petrol resulting in me sliding through the pearly gates as a ball of fire.

Title: Re: Tank fixings
Post by: red98 on 28 November 2016, 03:22:12 pm

Bore and tap 8mm be the same size allen key as rear mount then   ;)

Title: Re: Tank fixings
Post by: bryaneidins on 28 November 2016, 03:47:07 pm

Thanks Boys. I re-threaded mine today so will see how it goes with the 6mm bolt. If it loosens again i'll upgrade to 8mm.

Title: Re: Tank fixings
Post by: darrsi on 28 November 2016, 04:01:30 pm

Got a large thread self tapper on mine, does the job well.