old - Fazer Owners Club - old
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: jamie16v on 02 October 2016, 09:45:22 am
-
Hello guys, yesterday i retrofitted a HID projector kit into my headlamp. when fitting the kit it came with the H4 adapter rings to clamp the projector into the headlamp reflector housing. i noticed that this caused an approximate 30-50 degree angle on the projector which seems to angle the beam towards road signs and away from oncoming vehicles (up to the left down to the right) i know that right hand drive vehicles are supposed to be this way but this pattern seems extreme.
From seeing images on the net, the beam seems horizontal with a central dip which lowers to the right. where as my beam seems diagonal.
these are the projectors i fitted http://www.ebay.co.uk/itm/152028284543?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT (http://www.ebay.co.uk/itm/152028284543?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
anybody here noticed anything like this?. TIA
-
Or is this normal perhaps? I noticed that its the hradlamp housing that causes the tilt (being rhd).
-
Ive figured out the issue, its an dot type pattern and not the ece european pattern. Ive got some RHD EURO pattern ones on the way. :\