Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: Brettholmes89 on 09 July 2016, 10:29:56 am
-
I've got a 1999 fazer 600, want to put some bobbins on for the paddock stands I've just got. Anyone put them on? Is there a certain place to pu them on the swing arm or is it just a case of drill and tap?
I can make my own I just want to clarify where to put them :)?
-
Weld some bar to underside of the arm then drill and tap that. Not done it but wouldn't want the weight of the bike hanging on 3mm of thread
-
I've drilled and tapped the swing arm. Two m6 bolts. A 8.8 6mm has about 1.6 shear capacity so a fazer isn't going to shear two m6 bolts.
(http://uploads.tapatalk-cdn.com/20160710/d772ae80894e992bcc94dbc86315e2dc.jpg)
Quickly turned some out of aluminium and gave them a quick polish.
-
I've drilled and tapped the swing arm. Two m6 bolts. A 8.8 6mm has about 1.6 shear capacity so a fazer isn't going to shear two m6 bolts.
([url]http://uploads.tapatalk-cdn.com/20160710/d772ae80894e992bcc94dbc86315e2dc.jpg[/url])
Quickly turned some out of aluminium and gave them a quick polish.
You bolting them straight to the arm?
Pictures please