old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: gnm on 01 April 2016, 09:49:11 pm

Title: rear wheel bearings
Post by: gnm on 01 April 2016, 09:49:11 pm

hi all,   just noticed a bit of play on rear wheel bearings, has anyone used the all balls kit from wemoto? also any problems fitting or any special tools needed to fit them?

Title: Re: rear wheel bearings
Post by: unfazed on 01 April 2016, 10:51:41 pm

The right side is what usually goes and that bearing is a

 60/28 2RS C3 sealed race ball bearing
Replace the seal also

35mm x 52mm x 8mm seal
They are fairly standard bearing and seal, local bearing shops will probably have them in stock.
Go for know brands
 
 

Title: Re: rear wheel bearings
Post by: red98 on 02 April 2016, 06:50:10 am

yup....ive used the "all balls" bearings on both my thou and 6....no problems fitting and look to be good quality....done probs 2k with them and no problems   :thumbup 

Title: Re: rear wheel bearings
Post by: gnm on 02 April 2016, 10:23:15 am

thanks for that, probably just change all when wheels off anyway.