old - Fazer Owners Club - old
General => General => Topic started by: kukiz1984 on 25 January 2016, 06:43:34 pm
-
Hi
I have installed givi stoplight in my e52 top box but for some reason it has stopped working after a few months. I removed those lights today a saw that 6 bulb circuit is damaged. Does anyone know If I can replace these without buying a whole thing?
thx a lot.
-
It's a bit hard to tell, but it doesn't even look soldered. Soldering all those components to the copper tracks will surely help.
-
Should be easy enough to solder in replacement bulbs. I assume remaining four are working ok?
-
That's the thing the whole circuit doesn't work anymore, I was trying to find replacement bulbs on the internet but no luck.
-
You could find the fault by going round the bulb pins with a small battery, like a AA one or similar. The circuit should provide power to all bulbs at once so moving where you put the pos/neg power should show where a break is. Try cpc Farnell for bulbs
-
search 12v capless bulbs on ebay, look on the bulb to see watts, if non of the other bulbs are working they have either blown or theres a break in the pcb circuit, you could mend it with solder when you solder the new bulbs in.
-
Thx a lot for all your replies guys.
Will try to get some new bulbs and solder it back together
-
Thx a lot for all your replies guys.
Will try to get some new bulbs and solder it back together
or replace the bulbs with 12v leds - loads on the bay in all colours.