old - Fazer Owners Club - old
Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: msewelly on 26 December 2015, 10:08:09 pm
-
Hi,
Was riding around London, stopped the bike, went to restart it but nothing....all the lights were on, killswitch was off. Trouble is it wouldnt even turn over. In a moment of annoyance I pushed the side stand up hard and that seems to do the trick, I have a feeling its almost certainly the sidestand switch as it cut out when riding. I checked the fuses and all are fine, how do you check the switch, clean etc.
Mant thanks
-
Clean the switch in situ first, just use loads of wd40 or similiar and then check if it is moving in and out freely and not sticking, they do collect a lot of crud.
-
To test the sidestand switch you will need to take off the left hand side panel and look for a dark blue plug. Disconnect the plug and test for continuity between the pins with the side stand down. Try it when it's up also. I can't recall off hand which gives continuity, but as long as one gives continuity and the other doesn't then it's working