old - Fazer Owners Club - old

General => General => Topic started by: joebloggs on 10 December 2015, 06:15:10 am

Title: Anybody fitted SRAD forks to a 600 Fazer?
Post by: joebloggs on 10 December 2015, 06:15:10 am

Or more to the point can the stem's be swapped?

I know every man and his dog uses R1 forks but got these cheap

Answers on a postcard please :D

Title: Re: Anybody fitted SRAD forks to a 600 Fazer?
Post by: Deefer666 on 10 December 2015, 05:00:11 pm

The stems will need to be swapped... Local engineer job. I doubt the average person will be able to do it. You may need spacers as well. I only used an R1 on my FZS because as you said I got them cheap but even they are not a straight swap and require the stems swapping and a spacer under the top yoke.

Title: Re: Anybody fitted SRAD forks to a 600 Fazer?
Post by: Punkstig on 10 December 2015, 10:39:23 pm

If you go through with it make sure you fit the srad600's 4 pot calipers not the 750's 6 pots as they are shocking!

Title: Re: Anybody fitted SRAD forks to a 600 Fazer?
Post by: joebloggs on 14 December 2015, 03:22:30 pm

Quote from: Punkstig on 10 December 2015, 10:39:23 pm

If you go through with it make sure you fit the srad600's 4 pot calipers not the 750's 6 pots as they are shocking!

Found a set of four pots and a pair of Ferodo disc's for just over £90. Need to find someone to press out/in the steering stems now

Title: Re: Anybody fitted SRAD forks to a 600 Fazer?
Post by: joebloggs on 14 December 2015, 03:48:52 pm

After a SRAD USD lower yoke if anyone has one kicking around