old - Fazer Owners Club - old
Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: stevegixer on 03 December 2015, 09:13:28 pm
-
right lads i want to change the bulbs in my clocks,
how are the clocks to dismantle >
anybody done it ?
-
You need a sew diver steve it's a good start
-
You need a sew diver steve it's a good start
pheasant plucker :rolleyes :rolleyes
-
'avin probs with the spullchucker again, Luke? ;)
Where can you find a good sewer driver these days?
-
This will show you all you need to know to get into the back of the clocks.
http://www.cartestsoftware.com/fz1/multigaugeinstallation.html (http://www.cartestsoftware.com/fz1/multigaugeinstallation.html)
-
This will show you all you need to know to get into the back of the clocks.
[url]http://www.cartestsoftware.com/fz1/multigaugeinstallation.html[/url] ([url]http://www.cartestsoftware.com/fz1/multigaugeinstallation.html[/url])
Cheers buddy :)
-
'avin probs with the spullchucker again, Luke? ;)
Where can you find a good sewer driver these days?
Looks like he's getting his smucking furds wuddled :rollin :rollin :rollin
-
You need a sew diver steve it's a good start
and a 10mm ring spanner for the 3 nuts and washer on the bottom of the clocks. I suggest removing the screen as well as the two front infills.
-
:lol Lighten up fazerdud. It was lighthearted banter not meant to be taken literally.
Mike has already posted the link to all the info he'd ever need.