old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: mars696 on 05 November 2015, 06:14:01 am

Title: Setting the #3 carb pilot screw...
Post by: mars696 on 05 November 2015, 06:14:01 am

After trying to solve some low rpm problems that i had (and i still have), setting the pilot screws was a task,but we all know this motherf.... #3 screw.
So i found this little thing that make the job eeeeasy and hope that will help others too.Tested and works perfect.
I will post "my tool" soon.
Dont know if this woth the new topic,but what the hell... :lol


This is the THING...
 http://eu.banggood.com/Wholesale-Warehouse-105-Angle-Extension-6mm-Silver-Six-Hex-Drill-Bit-Screwdriver-Socket-Holder-wp-Uk-957155.html (http://eu.banggood.com/Wholesale-Warehouse-105-Angle-Extension-6mm-Silver-Six-Hex-Drill-Bit-Screwdriver-Socket-Holder-wp-Uk-957155.html)

Title: Re: Setting the #3 carb pilot screw...
Post by: red98 on 05 November 2015, 06:41:59 am

hi mars....yes,worth a new topic thanks for posting.......not quite 90 degrees but must work.thanks for sharing  :thumbup

Title: Re: Setting the #3 carb pilot screw...
Post by: kucho on 13 November 2015, 12:09:36 pm

http://es.aliexpress.com/store/product/105-degrees-1-4-Extension-Hex-Drill-Bit-Adjustable-Hex-bit-Angle-Driver-Screwdriver-Socket/124364_32493724481.html?ws_ab_test=searchweb201556_7_21_79_78_77_92_91_22_80%2Csearchweb201644_5%2Csearchweb201560_9&spm=2114.04020208.3.25.yuaUKb (http://es.aliexpress.com/store/product/105-degrees-1-4-Extension-Hex-Drill-Bit-Adjustable-Hex-bit-Angle-Driver-Screwdriver-Socket/124364_32493724481.html?ws_ab_test=searchweb201556_7_21_79_78_77_92_91_22_80%2Csearchweb201644_5%2Csearchweb201560_9&spm=2114.04020208.3.25.yuaUKb)


I think this one is the same... and cheaper!