old - Fazer Owners Club - old
General => General => Topic started by: joebloggs on 03 November 2015, 11:46:02 am
-
Still need a little work on the bare alloy, want satin not polished look so few more min's with wire wool and it'll be good to go
(http://s19.postimg.org/dr7aapgz7/WP_20151103_002.jpg)
(http://s19.postimg.org/wkt37pf77/WP_20151103_003.jpg)
(http://s19.postimg.org/3wkqi82er/WP_20151103_008.jpg)
-
Now back to the focin wheels
-
that looks amazing :eek
I wish somebody do that to my bike :lol
-
that looks amazing :eek
I wish somebody do that to my bike :lol
Fuck you very much
It matches my engine cases and a few other bits, well sort of,
-
Looks amazing, you obviously have too much time on your hands! ;)
-
Looks amazing, you obviously have too much time on your hands! ;)
Only took about an hour to remove the original paint and leave satin finish on the bits left bare (in front of the tv) few mins flating the other paint for a key for the new paint, five coats of paint in between polishing the swingarm, 15 min's in the oven to cure the paint, another half hour in front of the TV removing the paint again.
Bit more time with some wire wool/ wet and dry and I'll be happy with it.
Keeps me out of the pub :D
-
Looks amazing, you obviously have too much time on your hands! ;)
Keeps me out of the pub :D
Nonsense! everyone needs more pub time methinks!
-
Still need a little work on the bare alloy, want satin not polished look so few more min's with wire wool and it'll be good to go
([url]http://s19.postimg.org/dr7aapgz7/WP_20151103_002.jpg[/url])
([url]http://s19.postimg.org/wkt37pf77/WP_20151103_003.jpg[/url])
([url]http://s19.postimg.org/3wkqi82er/WP_20151103_008.jpg[/url])
Gave my rear caliper a couple or 6 coats of matt over the weekend, needs some flating back and a little work but considering where it sits I'm not going to be over fussy with it
(http://s19.postimg.org/yaflcp73n/WP_20151113_004.jpg)
Loosely mounted on the carrier, some serious polishing needs to be done now as the wheels are now very shiny
Bolts are Ti, the nipples stainless
(http://s19.postimg.org/6xaehy0j7/WP_20151116_005.jpg)
-
Is that your crotch in the picture :eek
-
That looks good mate, id like that look on my trx caliper. 8)
-
That looks good mate, id like that look on my trx caliper. 8)
You talking about his crotch :lol :lol :lol
-
That looks good mate, id like that look on my trx caliper. 8)
You talking about his crotch :lol :lol :lol
:rollin
-
That looks good mate, id like that look on my trx caliper. 8)
You talking about his crotch :lol :lol :lol
Well my bike is a bit too custom....could turn it into more of a crotch rocket :lol
-
That looks good mate, id like that look on my trx caliper. 8)
You talking about his crotch :lol :lol :lol
Well my bike is a bit too custom....could turn it into more of a crotch rocket :lol
Thanks for the likes, a little concerned about how much attention my crotch is getting :eek
-
That rear calliper has come up nice, i have 2 in the garage that are in need of repair, i have an FZS1000 on mine, did you split the calliper?
Did you need to replace the o-ring pieces???
I might dig mine out and try giving them a spruce up
-
Nice work Joe :)
That rear calliper has come up nice, i have 2 in the garage that are in need of repair, i have an FZS1000 on mine, did you split the calliper?
Did you need to replace the o-ring pieces???
I might dig mine out and try giving them a spruce up
You've only got them as you forgot to post them to someone :lol
-
oops...sorry sinto :lol
-
Yes I slit it, was seized but pistons ok so got a set of seals. You might get away with using the original o rings but mine were in a state so replacing them too. Going to go to local auto factors for them , far cheaper than standard parts
-
ok i have 2, one i split and needs new seals, the other may need splitting just to get the pistons out and give it a good clean, but Sinto may well be having them soon so, Sinto, pay attention!
:rollin
-
my old caliper i took off and never got back together, mainly as i did the FZS1000 upgrade...i need the seals that go in between the bits, i am sure someone said they had some they would send if i sent my address...
http://foc-u.co.uk/index.php/topic,17272.msg199205.html#msg199205 (http://foc-u.co.uk/index.php/topic,17272.msg199205.html#msg199205)
Looking for the 2nd one now as well...
-
(http://s19.postimg.org/cka45nf3n/WP_20151129_009.jpg)Sprayed my rear footrest hanger matte the same as all the other items, what do you thing, black or polished (only sprayed one atm) Footrest in the middle of having alloy part polished
-
(http://s27.postimg.org/7ndgzfe43/WP_20151129_011.jpg)
-
Rear wheel almost finished, just need to paint the sprocket carrier
(http://s19.postimg.org/3zum78lkj/WP_20151213_002.jpg)
-
Just gota decide if I can justify £50 for a steel/aluminium sprocket or to bolt the original back on.
(http://s19.postimg.org/aw604yjw3/WP_20151220_001.jpg)
(http://s19.postimg.org/9dalzzdbn/WP_20151220_009.jpg)
(http://s19.postimg.org/qt4s1ocab/WP_20151220_006.jpg)
-
Really needs a blue spot caliper.... :)
-
Really needs a blue spot caliper.... :)
Nah, what it really needs is a new hanger and the smallest hydraulic caliper I can find.
-
Yeah, those Chinese brembo ones are pretty good for rear brakes