old - Fazer Owners Club - old

General => General => Topic started by: joebloggs on 28 October 2015, 06:08:54 pm

Title: Caliper hanger torque arm bushing
Post by: joebloggs on 28 October 2015, 06:08:54 pm

Going to press the bolt out that fastens the torque arm to the rear caliper hanger. The bolt just turns so I guess its corroded to the bushing in the carrier.

Is the bush available as a seperate part?

If not, what has anyone done who had the same issue

Title: Re: Caliper hanger torque arm bushing
Post by: sinto on 28 October 2015, 06:24:21 pm

:useless
Hard to determine which bolt your asking about, the ones on my fazer 600 are just nuts and bolts so could easily be changed for similar.

Title: Re: Caliper hanger torque arm bushing
Post by: joebloggs on 28 October 2015, 06:36:21 pm

Not a concern any more, took a large hammer to it, just needed one almighty hit to break the seal.....

Title: Re: Caliper hanger torque arm bushing
Post by: sinto on 28 October 2015, 06:38:17 pm

Quote from: joebloggs on 28 October 2015, 06:36:21 pm

Not a concern any more, took a large hammer to it, just needed one almighty hit to break the seal.....

Well, that's one way :lol