old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: SteveMc278 on 27 October 2015, 12:56:55 pm

Title: Side stand engine cut out switch in more detail?
Post by: SteveMc278 on 27 October 2015, 12:56:55 pm

Tricky one to explain this, but here goes:
Should the side stand engine cut out switch - 1)stop the engine when bike's in gear (with clutch pulled in) when the side stand's down? OR   2)should the engine cut itself out at the moment when the clutch is let out - as you ride off (when the side stand's down)?

Title: Re: Side stand engine cut out switch in more detail?
Post by: fazersharp on 27 October 2015, 01:07:02 pm

with stand down the cut out comes when you put it in gear-- clutch is already in to put it in gear - all ok until you go from neutral

So your option  (1) is correct

Title: Re: Side stand engine cut out switch in more detail?
Post by: BBROWN1664 on 28 October 2015, 01:16:35 pm

1)

Title: Re: Side stand engine cut out switch in more detail?
Post by: Ferg on 28 October 2015, 10:55:14 pm

Agree 1)

Title: Re: Side stand engine cut out switch in more detail?
Post by: limax2 on 29 October 2015, 08:39:20 am

I check the action now and again, accidentally !!!

Title: Re: Side stand engine cut out switch in more detail?
Post by: StuSid on 29 October 2015, 09:50:49 am

I agree with everyone else number 1 is right, however my Fazer wouldnt even start in neutral when the side stand was down so i disconnected the cut off switch and got my Dad (auto electrician and mechanic) to use it as an immobiliser for my alarm.