Post by: mr wayneker on 01 July 2015, 04:55:58 pm
what can is this???? |
Post by: darrsi on 01 July 2015, 06:36:27 pm
http://www.spengineering.co.uk/product-1-fzs600-carbon-moto-gp-xls-exhaust.html (http://www.spengineering.co.uk/product-1-fzs600-carbon-moto-gp-xls-exhaust.html)
Post by: mr wayneker on 01 July 2015, 10:04:10 pm
one other thing is tonight I went to a local bike meet BMAD down in Torquay and all the other fzs first bolt where
the foot peg is for the down pipe was on the inside and mine is on the out side...so when I came back I switched it to
the inside now my centre stand wont go down...it looks like I have stainless down pipes....is this right???? :(
Post by: bandit on 01 July 2015, 10:22:02 pm
Post by: mr wayneker on 01 July 2015, 10:54:50 pm
try and bring it down..it comes down 1 inch then hits the pipe????
Post by: darrsi on 01 July 2015, 11:05:28 pm
I've got one on my Quill end can, but i cut the pipe down on the baffle to make it much shorter, but you wouldn't know at all when fitted.
http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2050601.m570.l2632.R2.TR3.TRC1.A0.H0.Xuniversal+baffle.TRS0&_nkw=universal+baffle&_sacat=96382 (http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2050601.m570.l2632.R2.TR3.TRC1.A0.H0.Xuniversal+baffle.TRS0&_nkw=universal+baffle&_sacat=96382)
Post by: mr wayneker on 01 July 2015, 11:16:14 pm
Post by: bandit on 01 July 2015, 11:19:12 pm
Post by: darrsi on 02 July 2015, 06:37:39 am
My SP Engineering exhaust is just raw sounding, with the original baffle in, but also marked up and legal.
I tried it once without the baffle and as awesome as it sounded the attention i got was beyond ridiculous so i immediately put it back in.
Saying that, there's someone who keeps riding around my area who sounds like they don't have an exhaust fitted at all, not only does it sound terrible but the noise is obscene.
Post by: Nightfury on 02 July 2015, 07:13:22 am
My SP Engineering exhaust is just raw sounding, with the original baffle in
+1,
I have the stubby big bore, sounds like Lucifer himself is tearing me a new one when I open the throttle!
Post by: mr wayneker on 02 July 2015, 07:27:07 am
and can you get the rear foot rest down with the SP can
to get this can lined up right ..it wont allow the rear peg to come down..i have to have the slice a bit squiffy
and my OCD wont allow me to leave it.
and I have no link pipes from 1-2...3-4 they just come together under the sump then go into one
couldn't I just hammer a dent in it where it wants to catch??
anyone else have the exhaust mount on the outside (bottom one)
Post by: Nightfury on 02 July 2015, 07:56:19 am
https://www.facebook.com/115917925244539/photos/a.149592898543708.1073741825.115917925244539/357033064466356/?type=1&theater (https://www.facebook.com/115917925244539/photos/a.149592898543708.1073741825.115917925244539/357033064466356/?type=1&theater)
The SP Engineering ones come with everything that you need, apart from the down pipe to link pipe gasket.
Here is the ebay listing for the pipe I have. (They have used a photo of my bike in the listing) You can see there is loads of room for the footpeg.
http://www.ebay.co.uk/itm/Yamaha-FZS600-98-04-SP-Engineering-Polished-Stainless-Stubby-Big-Bore-Exhaust-/281582074693?pt=LH_DefaultDomain_3&hash=item418f997b45 (http://www.ebay.co.uk/itm/Yamaha-FZS600-98-04-SP-Engineering-Polished-Stainless-Stubby-Big-Bore-Exhaust-/281582074693?pt=LH_DefaultDomain_3&hash=item418f997b45)
Your stainless down pipes are a 4 into 1. I wouldn't worry too much about what side of the mounting the downpipe bracket sits as long as there is no undue stress on the pipes.
You could hammer a dent in it if you want, but if you are as OCD as you say, you will always know that it is dented and not right!
Post by: mr wayneker on 02 July 2015, 08:37:13 pm
20150702 073418 |
here is the pic
thanks darrsi didn't know they did universal db killers :)
Post by: darrsi on 02 July 2015, 08:52:08 pm
My SP Engineering exhaust is just raw sounding, with the original baffle in
+1,
I have the stubby big bore, sounds like Lucifer himself is tearing me a new one when I open the throttle!
(Don't tell anyone, but) I drilled the holes in the baffle about 2mm wider in diameter, it was way too loud without it fitted so thought I'd try a compromise and it definitely sounds louder than before.
Post by: mr wayneker on 02 July 2015, 09:38:20 pm
Post by: steeeve66 on 03 July 2015, 06:35:00 am
https://www.facebook.com/pages/TubeTech-R-2t-R/112102162163569 (https://www.facebook.com/pages/TubeTech-R-2t-R/112102162163569)
Post by: Nightfury on 03 July 2015, 06:55:32 am
My SP Engineering exhaust is just raw sounding, with the original baffle in
+1,
I have the stubby big bore, sounds like Lucifer himself is tearing me a new one when I open the throttle!
(Don't tell anyone, but) I drilled the holes in the baffle about 2mm wider in diameter, it was way too loud without it fitted so thought I'd try a compromise and it definitely sounds louder than before.
Are you very friendly with your MOT tester then darrsi!? I was thinking of just cutting an inch off of the db killer, should have the same effect?
Post by: mr wayneker on 03 July 2015, 10:54:08 pm
now what DB killer will fit it and can I get new decals for it???? :D