old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: Billy Balthorpe on 08 June 2015, 06:48:26 pm

Title: Are there any other EXUP cables that fit the Gen 1 Fazer?
Post by: Billy Balthorpe on 08 June 2015, 06:48:26 pm

There was such a lot of bikes made by Yamaha that used the EXUP system, will any of the cables from other EXUP equipped bikes fit the Gen 1 Fazer?

Title: Re: Are there any other EXUP cables that fit the Gen 1 Fazer?
Post by: b1k3rdude on 08 June 2015, 07:30:57 pm

I have a set of replacement inners from venhill that need a volunteer

- http://foc-u.co.uk/index.php?topic=16696.0 (http://foc-u.co.uk/index.php?topic=16696.0)

Title: Re: Are there any other EXUP cables that fit the Gen 1 Fazer?
Post by: Billy Balthorpe on 08 June 2015, 07:55:38 pm

Hold the bus! I think my cables are ok, ive just given them a good tug and they seem to be still attached at the other end.

I'll find the servo at see what the other end is like.

Title: Re: Are there any other EXUP cables that fit the Gen 1 Fazer?
Post by: b1k3rdude on 08 June 2015, 10:02:11 pm

Quote from: Billy Balthorpe on 08 June 2015, 07:55:38 pm

I'll find the servo at see what the other end is like.

The only ends that 'let go' are down by the exup vale, so if they are good, you good to do - no cables required.

Title: Re: Are there any other EXUP cables that fit the Gen 1 Fazer?
Post by: Billy Balthorpe on 08 June 2015, 11:28:02 pm

EXUP servo motor is knacked, its making turny turny noises but no roundy roundy movement. You can turn the pulley with your fingers and feel the stripped gears inside.

So, replacement found on Ebay and ordered for £30, result.