old - Fazer Owners Club - old
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: Bondyboy96 on 03 April 2015, 10:52:04 pm
-
Help! So I removed the starter relay a few days ago, to clean the contacts on it and the ring terminal thay goes to the fuse snapped so I bodged it with a wire and spade connector, refitted it, press the starter and nothing -_- no surprise there tho. Got a new starter relay, fitted it and stull nothing. Any ideas? Checked all switches etc and cant see any issues :(
Cheers guys
-
Check fuse, check battery?
-
Yeah done fuses, battery etc, battery is only a month old aswell
-
Are you sure your 'botched' job you've done is sound?
-
Are you sure your 'botched' job you've done is sound?
:lol :lol :lol
-
Yeah done fuses, battery etc, battery is only a month old aswell
Doesn't mean it's charged. ;)
Also, Sinto has a valid point - checked the connections with a multimeter?
-
Yeah battery is fully charged :P haha and got a new starter relay on anyway and still doing nothing, but connections were sound and had good resistance when checked anyway
-
Killswitch? :)
-
Has it been knocked into gear? That would give you the same affect.
-
Killswitch is off and its in neutral :/
-
Checked the side stand sensor is not stuck?
Andy
-
Is there not a main fuse near the other fuses? Could that be blown? Are you getting all the lights on the dash and other lights working?
Another thought, years ago with my honda cbr my starter was playing up and got nothing when trying just like you, ended up the bushes in the starter were dodgy, it needed a wee tap on the starter unit to knock the bushes round enough to make a contact, maybe worth a try?