old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: Rexr on 21 February 2015, 05:32:31 pm

Title: Help..........Damper rod removal
Post by: Rexr on 21 February 2015, 05:32:31 pm
Just stripping down my gen 1 1000 forks to put in new seals and have a wee problem I can't get the damper rod out any suggestions on this would be appreciated
Title: Re: Help..........Damper rod removal
Post by: fazed out on 21 February 2015, 06:15:41 pm
Quote from: Rexr on 21 February 2015, 05:32:31 pm
Just stripping down my gen 1 1000 forks to put in new seals and have a wee problem I can't get the damper rod out any suggestions on this would be appreciated
  tape a 27mm socket to a piece of tube  then slide it down inside of forks after you taken spring out use a allen key at the bottom of forks  then you can undo  they arn't very tight
Title: Re: Help..........Damper rod removal
Post by: Rexr on 21 February 2015, 07:17:36 pm
Quote from: fazed out on 21 February 2015, 06:15:41 pm
Quote from: Rexr on 21 February 2015, 05:32:31 pm
Just stripping down my gen 1 1000 forks to put in new seals and have a wee problem I can't get the damper rod out any suggestions on this would be appreciated
  tape a 27mm socket to a piece of tube  then slide it down inside of forks after you taken spring out use a allen key at the bottom of forks  then you can undo  they arn't very tight

Cheers will give that a go in the morning....
Title: Re: Help..........Damper rod removal
Post by: Rexr on 22 February 2015, 03:29:42 pm
Cheers for that Fazed-out......all sorted now......