Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: solorider on 01 January 2015, 03:52:02 am
-
After the issues with the ignition switch and as the bike has 75k miles on it I have decided to take it off the road to give it some TLC, so to replace it I have bought a PIaggio X9 500 scooter, after my accident I still have issues with my knee and foot so a foot foward riding position will be beneficial till I get back to strength. I managed to buy a cat D 02 reg for £431 and all I need as far as I can tell is a number plate holder/ mudflap and a number plate. I will probably be off the fazer for a year as I will need to strip down to the frame as there is a lot of rust coming through, I will miss her though but I need to do the work now before things get worse.
-
Sounds a good project but a year? , get into it summer is a long way away yet :)
Good luck
-
good luck solo, both with the scoot and the fazer. projects take time, pretty much always longer than planned. healing takes time too.
bike magazine stated with authority that restorations tend not to be finished unless people show these three attributes:
- wealthy
- organized
- energetic
it stuck in my mind...
-
Well the scoot is turning out to be a pain, typical Italian electrics and stupid design, the regulator is goosed and they are a common thing to go, the power stand doesn't work nor does the headlights, as to the design PIaggio were clever in that they fitted a power main stand, but not so clever in that they didn't put a means to use it manually, but the other stupid part of the design is the oil filter is right above the main stand which is in the up position. Also there is an intercom system that works occasionally and the instruments are not very waterproof!!!
I'm glad it was cheap as I wouldn't want to pay top price for this bike in its present condition. So I have 2 projects.