old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: tweetytek on 16 November 2014, 09:26:38 pm

Title: parts catalogue and model numbers
Post by: tweetytek on 16 November 2014, 09:26:38 pm
so the parts catalog in the downloads section, refers to FZS600/(295DM-300E2)

a quick check on wikipedia (not sure how accurate this is) suggests models
so where does the "295DM-300E2" come from and how do the above model numbers relate - if at all - to the parts catalog?

ta
Title: Re: parts catalogue and model numbers
Post by: darrsi on 17 November 2014, 01:12:54 pm
A very high amount of parts are compatible on these bikes, hence the reason most breakers list them as 98-03.
It would be mainly fairings, tank, etc that would be different, although even tanks can be swapped over without too much fuss.
Title: Re: parts catalogue and model numbers
Post by: tweetytek on 17 November 2014, 01:19:00 pm
Quite. But not quite the answer sought.
Bit of background...  I asked because I had a bar off a guy on here which was off a fiz but was not the same as that which I removed.  The locating holes for switch gear were in different places. The 'serated' bits around the middle of the bars was in different locations. 
This made me wonder and postulate that there are subtle differences across the model range and different part numbers... So what are the definitive list of varying parts and respective numbers
Title: Re: parts catalogue and model numbers
Post by: darrsi on 17 November 2014, 01:55:09 pm
To be honest I doubt you'll ever get that answer in full on here.

Title: Re: parts catalogue and model numbers
Post by: tweetytek on 17 November 2014, 02:44:52 pm
Mmmm. You never know. Worth asking and certainly something to be aware of
Title: Re: parts catalogue and model numbers
Post by: YamFazFan on 18 November 2014, 07:37:50 pm
Quote from: tweetytek on 16 November 2014, 09:26:38 pm
so the parts catalog in the downloads section, refers to FZS600/(295DM-300E2) so where does the "295DM-300E2" come from

Is '295DM-300E2' the part number for the actual catalogue itself I wonder?.
Title: Re: parts catalogue and model numbers
Post by: tweetytek on 18 November 2014, 09:30:53 pm
???
Could well be
Title: Re: parts catalogue and model numbers
Post by: darrsi on 18 November 2014, 10:17:43 pm
Quote from: YamFazFan on 18 November 2014, 07:37:50 pm
Quote from: tweetytek on 16 November 2014, 09:26:38 pm
so the parts catalog in the downloads section, refers to FZS600/(295DM-300E2) so where does the "295DM-300E2" come from

Is '295DM-300E2' the part number for the actual catalogue itself I wonder?.

You're right, it's the catalogue production number!
Title: Re: parts catalogue and model numbers
Post by: YamFazFan on 18 November 2014, 10:32:35 pm
The catalogue shows the fairing parts for the boxeye model only.I'm guessing that there must be other,revised/updated catalogues for the foxeye models.I have seen a different model code for 2002/3 elsewhere as well..5RT4.