old - Fazer Owners Club - old
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: Nebuchernezzer on 13 November 2014, 02:53:27 am
-
Does anyone know if FZ1 and FZS600 bar clamps are interchangable?
I want to move my bars forward a bit (i'll be removing the fairing so clearance isn't an issue), vertical risers would be good.
Saw these for FZ1, reasonable price, just the bolt spacing that could be a bit iffy.
http://www.amazon.com/gp/offer-listing/B0081UBF5A/?tag=tdss-20 (http://www.amazon.com/gp/offer-listing/B0081UBF5A/?tag=tdss-20)
If they don't fit what clamps have other guys used?
-
Found some pics with some very borderline useful measurements at least...
http://www.amazon.com/dp/B007ITWGYY/ref=asc_df_B007ITWGYY3395307?tag=thefind0061095-20&creative=395261&creativeASIN=B007ITWGYY&linkCode=asn (http://www.amazon.com/dp/B007ITWGYY/ref=asc_df_B007ITWGYY3395307?tag=thefind0061095-20&creative=395261&creativeASIN=B007ITWGYY&linkCode=asn)
-
If your using the standard bars, then they might just fit........ Just!
When you fit Renthal 758's to the standard risers, they only just clear the fairing by a hair.
The gyt risers look pretty cool tbh, but if you look carefully, they're set back slightly, and might be a better option than fz1 risers which are massive and square on to the mounting holes.
-
I've got a current Street triple headlight that's going on so don't care about the fairing. I've got some kind of standard diameter after market bars on there now which I'll be keeping.
I want somthing half way between what I have now with huge setback and clip ons.
-
I've seen streety lights on another Fazer somewhere, and it looked really cool! Get some photos on here when you finish it, I'm intrigued! 8)
-
I've done a paint bucket mock up just so I can visualise my plans a bit, it's on my work pc but I'll post it up later.
Was thinking about making some rad covers at the same time but undecided on that.