old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: wheelywill on 06 November 2014, 08:03:11 pm

Title: Gear Selector
Post by: wheelywill on 06 November 2014, 08:03:11 pm

Hi can anyone help, where my gear selector attaches to the back of my foot peg there has become a lot of movement not so much as wobbling about but  sliding back and too something has worn do I need a new gear selector or is it something to do with the back of the footpeg. cheers Dave

Title: Re: Gear Selector
Post by: PaulSmith on 07 November 2014, 02:35:23 pm

I had a similar issue a couple of years ago which finally turned out to be the knurl screw holding the shift rod onto the shift shaft was not quite tight enough. Part number 14 in this diagram: https://www.yamahamotorcyclespares.co.uk/genuineparts/9023/19/yamaha%20fzs1000%20fazer%2003-05/shift%20shaft?uID=0 (https://www.yamahamotorcyclespares.co.uk/genuineparts/9023/19/yamaha%20fzs1000%20fazer%2003-05/shift%20shaft?uID=0)

Title: Re: Gear Selector
Post by: wheelywill on 07 November 2014, 07:17:47 pm

Hi cheers for that info but that part is fine must be something else