Fazer Owners Club - Unofficial

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: coolhandluke on 19 October 2014, 02:20:26 pm

Title: Finding Neutral
Post by: coolhandluke on 19 October 2014, 02:20:26 pm

Hi Guys / Gals, during a chain and sprocket change, ive taken the front sprocket cover off get at the sprocket and in doing so had to take off the gear linkage lever. i tried to score it so finding the correct position when reassembling it wouldnt be an issue but i didnt do it very well. tried to find the correct position and its no longer in neutral and i cant find neutral when trying to come through the gears. has anybody had this before and what did you do!!


thanks in Advance!

Title: Re: Finding Neutral
Post by: coolhandluke on 19 October 2014, 02:41:41 pm

Ive sorted it. the sprocket had turned slightly so i just put it back to its original position and it poped back into neutral. hope this will help any other numpties like me :)

Title: Re: Finding Neutral
Post by: Deefer666 on 19 October 2014, 04:56:56 pm

if you clean the crud off, there is a dot punched into the end of the gear shaft. Use that to align the selector mechanism.