old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: stevierst on 08 August 2014, 04:05:26 pm

Title: Oops!
Post by: stevierst on 08 August 2014, 04:05:26 pm

Anyone got a spare one I can buy off them?(http://img.tapatalk.com/d/14/08/08/degujene.jpg)

Title: Re: Oops!
Post by: brooker81 on 08 August 2014, 05:48:58 pm

Jesus that's fucked.had a spare one just got rid :-(

Title: Re: Oops!
Post by: stevierst on 08 August 2014, 06:06:33 pm

Bugger! Cheers anyway Paul.

 Got the valve out after a few dulled drill bits, and the valve was seized solid.

I had to soak the valve in wd40 for a few hours, and use a blow torch on it before it finally gave way. The shaft at the plate end was badly scored, but a quick rub with micromesh and all was smooth again.

Had to use cobalt drill bits to drill out the old studs in the manifold, and just going to Re-tap them tomorra.

Now if there's no pulley wheel knocking about, I guess I'll just have to make one myself!