old - Fazer Owners Club - old
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: kelly1 on 04 July 2014, 04:36:43 pm
-
hi tried to balance carbs with a morgan carbtune carbs 1and2 ok carb4 ok carb3 goes to the top of the tube and will not balance suggestions please
-
You should be balancing 1 with 2 together first.
Then balance 3 with 4 on their own separately.
Then with the middle screw adjust until 1&2 are level with 3&4.
-
Have you checked there's no problems with the connection on No. 3?
Does that tube have the 2 little tubes inside to throttle the compression?
Have you swapped the tube onto another cylinder to confirm it's not the tube/ gauge at fault?
-
You should be balancing 1 with 2 together first.
Then balance 3 with 4 on their own separately.
Then with the middle screw adjust until 1&2 are level with 3&4.
Then go back and re-do 1&2 as they will have changed, then 3&4, then 1&2 again, then the left pair to right pair again. Repeat for about an hour until it finally all lines up. :D
-
You should be balancing 1 with 2 together first.
Then balance 3 with 4 on their own separately.
Then with the middle screw adjust until 1&2 are level with 3&4.
Then go back and re-do 1&2 as they will have changed, then 3&4, then 1&2 again, then the left pair to right pair again. Repeat for about an hour until it finally all lines up. :D
Liked this post, I'm trying to get down to an hour but never manage :rollin
-
Took me about an hour last time too, I now need to find a field to do mine in though, because my new exhaust and living in a very respectable close doesn't make for keeping the neighbours happy when doing my carbs LOL