old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: slappy on 18 June 2014, 01:10:11 pm

Title: power comander 3
Post by: slappy on 18 June 2014, 01:10:11 pm

I am looking at buying a second hand pc3 but there is no software disc or usb cable with it. I assume I could just get an usb cable from maplins that would do the job so not too bothered about that. Is the software disc  necessary? Also do I need to disable the O2 sensor?
I am not bothered about fitting instructions as I found a youtube vid that showed how to do it but would I need the instructions to show me how to download a map for it and set it up correctly.
Or am I just better off splurging 3 times the cost of the second hand one and buying a new one?
Any help or advice would be appreciated.

Title: Re: power comander 3
Post by: slimwilly on 18 June 2014, 05:46:38 pm

But one then if in trouble borrow some,,there must be someone near you with the software,,or we could email it to you

Title: Re: power comander 3
Post by: chaparral02 on 19 June 2014, 08:34:18 pm

Quote from: slappy on 18 June 2014, 01:10:11 pm

Is the software disc  necessary?

You can download the software, manuals ,firmware ,etc etc from the Dynojet websites .. ;)

UK site = http://www.dynojet.co.uk/index.php/downloads#pciii (http://www.dynojet.co.uk/index.php/downloads#pciii)

US site = http://www.powercommander.com/powercommander/Downloads/powercommander_downloads.aspx?ProdType=PCIIIUSB (http://www.powercommander.com/powercommander/Downloads/powercommander_downloads.aspx?ProdType=PCIIIUSB)

Title: Re: power comander 3
Post by: slappy on 19 June 2014, 10:14:48 pm

Thanks for those links, looks like I will be getting myself a cheap power commander :)

Title: Re: power comander 3
Post by: ogri48 on 20 June 2014, 12:52:48 pm

I got mine second hand mate, it's all good :)

Title: Re: power comander 3
Post by: slimwilly on 20 June 2014, 02:52:47 pm

I suppose the main thing is it has to have the correct wiring loom plugs on it, so Yamaha FZ1s also R1 i think

Title: Re: power comander 3
Post by: slappy on 23 June 2014, 03:20:44 pm

 :o The guy at work brought the power commander round to my house this afternoon and it does not fit my bike. The wiring plugs are completely different. The part number on it is unreadable so we could not even find out which bike it is meant to fit. He bought it second hand himself to put on an 2006 R1 which was written off before he fitted it so it looks like he got the wrong one in the first place.
Time to dig deep and buy a new one I think.