old - Fazer Owners Club - old

General => General => Topic started by: tex on 07 January 2012, 10:25:17 am

Title: gauge
Post by: tex on 07 January 2012, 10:25:17 am

 
 
     hi,
        Does anybody know of a good motorcycle elecy or shop, to fit a multi gauge and white dials, I live in the north london, herts essex area. But dont mind traverling a bit.
 
                  Tex

Title: Re: gauge
Post by: Silverdream on 07 January 2012, 04:51:33 pm

 
Hi...
 
Fitting a multigauge?? which one?
 
Excellent write up of Christians multigauge installation here...
 
http://www.cartestsoftware.com/fz1/multigaugeinstallation.html (http://www.cartestsoftware.com/fz1/multigaugeinstallation.html)
 
have a go yourself and then while you are doing that it should be quite easy to fit the white dials...
 
Jobs an easy one and you save yourself a load of dosh...!!!
 
 
Silverdream

Title: Re: gauge
Post by: tex on 08 January 2012, 12:33:24 pm

 
 
  Thanks silver, the gauge came from christian, so i have the instructions. Never done anything like this ,so did not want to screw it up, can do the basics, I will have a good read and might have a go.
 
 
                             tex.

Title: Re: gauge
Post by: paul1606 on 08 January 2012, 06:42:59 pm

the soldered connections are a bit fiddley , if you,ve dodgy eyesight like me i found it easier doing it with a magnifying glass and before the smartarse answers a soldering iron. But if you do cock up you can use a solder sucker to remove & start the joint again

Title: Re: gauge
Post by: tex on 19 January 2012, 08:47:56 pm

 
 Thanks paul