Got this from Dale at Holeshot, i was asking about the headers working with ivans kit and the costs to post them with the ais removal kit he has
Yes I have quite a few guys behind the scenes with his jetting running my
Holeshot header, just don’t mention it to Ivan or he will blow a gasket. I
cant tell you if any adjustments will be needed though, but it should be
real close. I would also install my timing advancer though and set the TPS
to 10K using the way the service manual says to do it. Jacking around the
TPS does not have the same effect off the bottom as plus 3 degrees static I
do with my rotor
Thanks Dale
1) thoughts on the tps setting
2)thoughts on the timing advancer
remembering i aint no sunday power ranger my bike gets used for touring and bike rallies rarely over a ton or even 8k revs lol as nearly always have th mrs on her kwak with me
just don’t mention it to Ivan or he will blow a gasket.
1)
I guess posting it on here means it's pretty secret then....... :pokefun
Whale