old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: solorider on 04 March 2014, 06:32:49 pm

Title: alarm wiring question
Post by: solorider on 04 March 2014, 06:32:49 pm

anyone know where the alarm wiring plugs are on a gen 1 is? looking at pictures on the net mine does not have a plug there, so any help would be appreciated.
thanks

Title: Re: alarm wiring question
Post by: Stradaman on 04 March 2014, 07:09:21 pm

The alarm loom wires are under seat near side, 2x 4 pin plugs and 1x3 pin plug, if non EU model there are no plugs.

Title: Re: alarm wiring question
Post by: solorider on 06 March 2014, 12:18:11 am

Still can't find the plugs, I know my hoe is a uk spec machine as I phoned yamaha just after I bought the bike and they told me it is a uk spec bike. So any pictures etc would be appreciated.

Title: Re: alarm wiring question
Post by: Stradaman on 06 March 2014, 06:11:08 pm

Take your seat off, look to the near side of the frame and the 3 plugs will be mid way along it, you may find that a previous owner had an alarm fitted then removed so the plugs have been taken off as well.

Title: Re: alarm wiring question
Post by: solorider on 07 March 2014, 10:34:45 pm

Quote from: Stradaman on 06 March 2014, 06:11:08 pm

Take your seat off, look to the near side of the frame and the 3 plugs will be mid way along it, you may find that a previous owner had an alarm fitted then removed so the plugs have been taken off as well.

all 3 plugs were removed and most of the wiring as well, I only found 3 wires and they were for the rear indicators and an earth.