old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: HarryHornby on 17 February 2014, 07:39:18 am

Title: Main beam flash switch and carb rubbers
Post by: HarryHornby on 17 February 2014, 07:39:18 am

Just picked up my new Fazer and noticed that the "flash" switch, for the main beam doesn't work.  Is it easy to replace or do I need that whole unit on the handle bars that  it connects into?


Also, carb rubbers are in a right state, easy to replace or a garage job?  I'm no mechanic, I will happily change oil, balance carbs (badly LOL) adjust chain, I've done the rear pads once but it took ages.


Cheers

Title: Re: Main beam flash switch and carb rubbers
Post by: johna6968 on 17 February 2014, 08:33:48 am

If you need carb rubbers I should have a good used set here in a couple of days..

Title: Re: Main beam flash switch and carb rubbers
Post by: HarryHornby on 17 February 2014, 08:41:40 am

ooooooo, yes please.  Are you replacing your ones?

Title: Re: Main beam flash switch and carb rubbers
Post by: johna6968 on 17 February 2014, 12:38:47 pm

I have messaged you re: the inlet rubbers.. cheers john

Title: Re: Main beam flash switch and carb rubbers
Post by: HarryHornby on 20 February 2014, 07:14:04 am

any ideas anyone?   :)

Title: Re: Main beam flash switch and carb rubbers
Post by: HarryHornby on 20 February 2014, 08:22:04 am

Thanks!   :b   Shall I just spray it everywhere?  :\

Title: Re: Main beam flash switch and carb rubbers
Post by: HarryHornby on 22 February 2014, 11:02:47 am

BINGO!  good old WD40!  :)   thanks for the advice.


One thing I've noticed about the bike after testing the main beam, I HAVE TWO HEADLIGHTS!!!!!  whooop whooop!  Looks like it's had the headlight mod done!  :)