old - Fazer Owners Club - old

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: Drax on 13 February 2014, 09:36:13 pm

Title: bellypan Fitting
Post by: Drax on 13 February 2014, 09:36:13 pm: I've managed to aquire a used official Yamaha Gen2 Belly pan. :)

However, there are no bolts with it & the guy who I bought it from said it utilises the 4 bolts on the bottom of the engine.(sump?)

Is this right or is there an official fitting kit & if so any ideas where I get it from?

Thanks for any help.
Title: Re: bellypan Fitting
Post by: Lez72 on 14 February 2014, 08:34:58 am: I had just written a load of text about the fitment of a Gen 1 bellypan and then realised you wanted info about a Gen 2. Doh

Sorry I'm not sure but someone will be along in a minute to point you in the right direction.
Title: Re: bellypan Fitting
Post by: locksmith on 14 February 2014, 03:38:29 pm: If IRC there is a little bracket each side toward the rear of the belly pan as well as the straight through fixings.
Title: Re: bellypan Fitting
Post by: Gary on 15 February 2014, 06:36:21 pm: Mine was fitted but I had a look yesterday and its 2 brackets ... ill take a pic tomorrow for you.
Title: Re: bellypan Fitting
Post by: Drax on 16 February 2014, 08:10:10 pm: Quote from: Gary on 15 February 2014, 06:36:21 pm
Mine was fitted but I had a look yesterday and its 2 brackets ... ill take a pic tomorrow for you.
Many thanks Gary :)
Quote from: locksmith on 14 February 2014, 03:38:29 pm
If IRC there is a little bracket each side toward the rear of the belly pan as well as the straight through fixings.
As I woke up an idiot - what does IRC mean? :o
Quote from: Lez72 on 14 February 2014, 08:34:58 am
I had just written a load of text about the fitment of a Gen 1 bellypan and then realised you wanted info about a Gen 2. Doh
Been there. Done that! ;)
Title: Re: bellypan Fitting
Post by: Andy FZS on 16 February 2014, 09:51:26 pm: If I recall correctly it means iirc or something like that. Lol
Title: Re: bellypan Fitting
Post by: locksmith on 17 February 2014, 09:36:56 am: Quote from: Andy FZS on 16 February 2014, 09:51:26 pm
If I recall correctly it means iirc or something like that. Lol
:lol

I had a look in the garage yesterday as I have a damaged belly pan taken off the bike I wrote off.
No fittings I'm afraid, my lad took all the bits off the bike as I was laid up and couldn't walk, he obviously left the brackets on the bike.
Title: Re: bellypan Fitting
Post by: Drax on 22 February 2014, 08:31:36 pm: Found out that I'm a twat as I had the necessary fitting brackets all along - it's just that they were already fixed inside the belly pan. :o

The only reason that I know this is because I searched the interweb & found that someone on sportbikes.net had posted a fitting with pictures. (I would have shared the link but they are tricky & won't let me copy/paste the link)

Thanks everyone for your replies. :thumbup
Title: Re: bellypan Fitting
Post by: Drax on 22 February 2014, 08:55:42 pm: Just bought some R&G bar end protectors.

Anyone know where they go? :b