old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: Newgolddream on 15 December 2011, 07:49:34 pm

Title: Fuel gauge problem
Post by: Newgolddream on 15 December 2011, 07:49:34 pm

Anyone know a quick fix for this? Filled her up, gauge went to full, after 100 miles gauge still showed full - funny, i thought. After 175 miles warning light flickers on (hmm, that still works then). Needle goes up & down when I turn on & off but when powers on stays permanently up (dream on misses). It's not an essential fix but it is a bit annoying! Any ideas out there?

Title: Re: Fuel gauge problem
Post by: solorider on 15 December 2011, 07:53:11 pm

you may have a short on the feed wire to the gauge,or a short in the sender unit

Title: Re: Fuel gauge problem
Post by: marksfazer on 16 December 2011, 08:20:23 am

I had that problem on mine the other week, just unplugged the electrical connector under the tank and plugged it back in and it all seem to work again!

Title: Re: Fuel gauge problem
Post by: Skippernick on 16 December 2011, 07:26:52 pm

Don't know if it works on a float system, but check its not blocked up with crud in the tank maybe?

Title: Re: Fuel gauge problem
Post by: Newgolddream on 16 December 2011, 10:22:38 pm

Thanks for the advice/suggestions guys. Hopefully the 'unplug and plug back in' will do the job. I don't mind hammers and spanners but usually end up getting my wires crossed with electrics! :o  Hope to have time this weekend between buying a tree, wrapping presents, cleaning bike and car, prepping car for MOT (what a stupid time of year for an MOT) and ferrying kids around Gloucestershire.