old - Fazer Owners Club - old
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: Captain Chaos on 03 December 2011, 10:02:55 pm
-
Hi Chaps
Anyone got any experiance of these - looks genuine and ok but still a little unsure if they are a worthy replacment for the stock ones ??
Any thoughts ??
-
Jury is out at the moment Cap'n as Farjo has a couple of split header collar rings on his 3 year old 10,000 milers. I have had the motad pipes on two bikes and they have been fine.
-
I did abit of research on the net when I was looking for mine and out of three suppliers that kept coming up (sandybikespares, delkevic and motad) it was motad that seemed to have the best rep so I went with them. No complaints so far.
if you're looking for a cheap option I saw these the other day, they look stainless:
http://www.ebay.co.uk/itm/Yamaha-FZS600-FZS-600-Fazer-00-Exhaust-System-Aftermarket-/120804939045?pt=UK_Motorcycle_Parts&hash=item1c20891525 (http://www.ebay.co.uk/itm/Yamaha-FZS600-FZS-600-Fazer-00-Exhaust-System-Aftermarket-/120804939045?pt=UK_Motorcycle_Parts&hash=item1c20891525)
-
Thanks for the advice, I actually took a punt on them, will post feedback once i have them fitted.
-
They're fine. Had a set on two of my Fazers for tens of thousands of miles. Only thing is you will probably have to file just a little bit off your centrestand so that it goes back up fully when you push the bike off the stand. Easy enough though.
-
a lot mof people on other forums have mentioned about the fit of delvic pipes compared to the motad pipes,most say the motad pipes fittede better,a few years a go i had a blackbird and i first fitted a set of motad downpipes and i found the fit not very good,i had to try and bend one of the downpipes slightly (one of the centre piped,so not bent due to transport) i had that system on for a month or 2 then i bought a set of delvic pipes,i found they fitted perfectly,the only issue which is a common fault on fully faired bikes is the delvic pipes can touch the fairing lowers
-
I recently fitted a set of sandy bike spares downpipes and they went on like a glove, was well impressed with them.