old - Fazer Owners Club - old
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: HJFazer on 02 October 2013, 12:48:56 pm
-
Hi,
I have a 2000 model FZS600 which, despite an accident earlier in the year (old lady not looking + dual carriageway +rain = slide down road) I absolutely love it! I am however on a budget but want to do it up.
Anyway, so I bought a rear hugger from a breakers on ebay for pretty cheap but when it arrived it turned out it didn't come with a mounting bracket. Fair enough, it was cheap and the buy from ebay didn't say it had one so no issue there. I did ask them if the had the bracket for sale but apparently the hugger had previously been held on using zip ties on the one side.
My question is, if i use the bolts on the chain side of the swing arm, do you think it would be ok to use zip ties through the other side and round the swing arm?
Would be great if someone could help on this, it's hard doing the bike up on a budget and i'm pretty new to all things motorcycles so any advice is appreciated.
Will try to post pics of it soon :)
H
-
Mine has a zip tie on it (yellow on a black bike for some odd reason?)
-
I wouldnt.
I have a hugger and just recently removed it to proper clean the chain guard part of it. I also removed the bracket that you have not got so I could paint it. It fits under the rear brake hose guide that sits ontop of the swingarm.
Why dont you make one. Undo brake line loupe bracket bolt - slide under your bracket and use same bolts.
-
Hi fazersharp,
I'd considered making one, but can't think of an easy way to do that. Wouldn't it really need to be made out of metal?
I'll have a look though, going to take a proper look again on Friday so maybe i'll get a flash of inspiration as to how to do so.
Thanks
-
i have a bracket off the bike at the moment,if i get time tonight i`ll post a piccie ;)
-
We had a discussion a while back, about the fact that not all huggers are the same, and fit differently.
They definitely aren't standard!
-
not all huggers are the same, and fit differently.They definitely aren't standard!
good point
Wouldn't it really need to be made out of metal
Er ---yes. Every good bike diy er should have loads of bits and bobs -metal - flat(bend it) angle (adapt it )
-
red98, if you could post a pic that would be awesome. I appreciate it might not be the same model, but any kind of an idea what it might look like would help.
Think i'll probably be heading back to my old mans to take advantage of his garage and tools then. Can't say I have an abundance of spare metal.. yet ;)
-
yeh...might not be exactly what you want for your hugger but a good starting point ;)
-
...hi hjfazer.....piccies....hope they help,hugger and bracket belong to "christoT" and are for sale if all else fails......look in for sale section under "breaking fzs600 for spares"...
-
That looks just like mine
-
That looks just like mine
ah....your bike need cleaning as well :lol
-
should read "looked" and then refer to my first post
-
Cheers red98,
I've sent you a PM... I think... if I haven't, well I intended to,
-
Bracket looks virtually identical to mine too, including the corrosion
-
Mines held on with a bolt and cable ties. Not had a problem in 4 years.
-
FYI
Powerbronze sell this bracket for £20
Hugger being fitted at the weekend
-
.
-
(http://i455.photobucket.com/albums/qq274/gibbsspares/DCP_1609_zps18b20f81.jpg)][URL=http://s455.photobucket.com/user/gibbsspares/media/DCP_1609_zps18b20f81.jpg.html](http://i455.photobucket.com/albums/qq274/gibbsspares/DCP_1609_zps18b20f81.jpg) (http://[URL=http://s455.photobucket.com/user/gibbsspares/media/DCP_1609_zps18b20f81.jpg.html)[/url]