old - Fazer Owners Club - old
Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: jason1 on 30 September 2013, 05:22:47 pm
-
Id like to replace the rear torsion bar on my gen1 600 with a nice stainless/chrome one . Does anyone know if they are sold anywhere ?or can come off another bike for straight swop over. 8)
-
Why not paint it. I actually perfer it the way it is because its a silly extra bit down there and being black it kind of disappears. Its slung down there out of the way anyway
-
I put a trx 850 alloy one on mine, £10 off ebay and a straight swap. Matches the swingarm as well.
-
There are a couple from other bikes that are straight swaps, most common being the fzs1000 bar which is slightly longer but doesn't seem to be too long for brake hose.
On a side note, It's nothing personal but, it's not really a torsion bar... Torsion/torque implies it's being twisted which it's not. It's being stretched so it's more of a stay bar. A common mistake but a mistake none the less ;)
Chris
-
torque-arm ??
-
On a side note, It's nothing personal but, it's not really a torsion bar... Torsion/torque implies it's being twisted which it's not. It's being stretched so it's more of a stay bar. A common mistake but a mistake none the less ;)
Chris
It's nothing personal ;) , but it restrains the torque imposed on on the caliper carrier when the brake is applied. i.e. trying to twist the caliper and carrier round the wheel spindle.
Strange that in a parts list I have it is called a compression bar!
To get back to the main topic, the bar is 240mm between hole centres. I have an alluminium one on my bike that is the same length but not sure which Yamaha model it came from.
-
To get back to the main topic, the bar is 240mm between hole centres. I have an alluminium one on my bike that is the same length but not sure which Yamaha model it came from.
TRX's and Thunderace's are that lenght. I have one for sale by the way :smokin
-
fzs1000 bar ordered of ebay .£10 all in :pc need now :grumble
-
fzs1000's ones are too long and awkward though
-
On a side note, It's nothing personal but, it's not really a torsion bar... Torsion/torque implies it's being twisted which it's not. It's being stretched so it's more of a stay bar. A common mistake but a mistake none the less ;)
Chris
It's nothing personal ;) , but it restrains the torque imposed on on the caliper carrier when the brake is applied. i.e. trying to twist the caliper and carrier round the wheel spindle.
Strange that in a parts list I have it is called a compression bar!
To get back to the main topic, the bar is 240mm between hole centres. I have an alluminium one on my bike that is the same length but not sure which Yamaha model it came from.
Hmm, I see the point you're making but the bar itself is still not being twisted... Guess it just depends how you look at it.
Yes, back on topic. I removed mine, sanded it and sprayed it black during my winter fiddling last year and it looked good as new. Took about 20 minutes + time for paint to dry but looked much smarter again. I also painted the caliper carrier black too, much neater than the grey/silver it was.
Chris
-
On a side note, It's nothing personal but, it's not really a torsion bar... Torsion/torque implies it's being twisted which it's not. It's being stretched so it's more of a stay bar. A common mistake but a mistake none the less ;)
Chris
It's nothing personal ;) , but it restrains the torque imposed on on the caliper carrier when the brake is applied. i.e. trying to twist the caliper and carrier round the wheel spindle.
Strange that in a parts list I have it is called a compression bar!
To get back to the main topic, the bar is 240mm between hole centres. I have an alluminium one on my bike that is the same length but not sure which Yamaha model it came from.
Hmm, I see the point you're making but the bar itself is still not being twisted... Guess it just depends how you look at it.
Yes, back on topic. I removed mine, sanded it and sprayed it black during my winter fiddling last year and it looked good as new. Took about 20 minutes + time for paint to dry but looked much smarter again. I also painted the caliper carrier black too, much neater than the grey/silver it was.
Chris
Technically the bar is being stretched so it's a tension bar ! ? ;) :rollin :lol
Back on subject :lol I am am happy with the standard one
-
On a side note, It's nothing personal but, it's not really a torsion bar... Torsion/torque implies it's being twisted which it's not. It's being stretched so it's more of a stay bar. A common mistake but a mistake none the less ;)
Chris
It's nothing personal ;) , but it restrains the torque imposed on on the caliper carrier when the brake is applied. i.e. trying to twist the caliper and carrier round the wheel spindle.
Strange that in a parts list I have it is called a compression bar!
To get back to the main topic, the bar is 240mm between hole centres. I have an alluminium one on my bike that is the same length but not sure which Yamaha model it came from.
Hmm, I see the point you're making but the bar itself is still not being twisted... Guess it just depends how you look at it.
Yes, back on topic. I removed mine, sanded it and sprayed it black during my winter fiddling last year and it looked good as new. Took about 20 minutes + time for paint to dry but looked much smarter again. I also painted the caliper carrier black too, much neater than the grey/silver it was.
Chris
Technically the bar is being stretched so it's a tension bar ! ? ;) :rollin :lol
Back on subject :lol I am am happy with the standard one
Tension bar, that's what I was trying to say in my first post but couldn't remember the right word for the opposite of compression :o . Thanks :)
Chris
-
What's in a name?
Torque arm's what i calls 'em,& seems to be what they list them as on auction sites too ;)
might find a tension bar difficult to find listed :D
Everybody calls sandpaper err~ sandpaper, it ain't made with sand though.
-
I put a trx 850 alloy one on mine, £10 off ebay and a straight swap. Matches the swingarm as well.
same here but mine has the trx caliper and hanger and hose as well all bolts straight with no mods