old - Fazer Owners Club - old

Bikes, Hints'n'Tips => FZS600 Fazer => Topic started by: topgun44 on 29 November 2011, 12:18:50 am

Title: Carb inlet rubbers all cracked up
Post by: topgun44 on 29 November 2011, 12:18:50 am

yes my bike got 2 crack rubbers i was lucker and found set on ebay second hand for 12pound  ;)  so i going to change them soon i guess they can been pain to do airbox off and other things any tips to make it any easy oh the bike is 600 year 2000
thanks all ;)

Title: Re: Carb inlet rubbers all cracked up
Post by: Fazerider on 29 November 2011, 09:26:52 am

Yep, it's not going to be a 10 minute job.
Battery out... slide the airbox back and then you've room to wriggle the carbs out of the inlet rubbers.
Not sure whether there's enough clearance to get sufficient access to undo the screws and replace the outer rubbers without disconnecting the carbs completely. If you're doing all four you'll certainly need to get the carbs right out. All fairly straightforward, don't forget the carbs are connected to the coolant circuit.

Title: Re: Carb inlet rubbers all cracked up
Post by: topgun44 on 01 December 2011, 01:54:21 pm

wow what a crap job took me about 2 hours to do so much crap in the way coils pump but got there in the end job done   ;)

Title: Re: Carb inlet rubbers all cracked up
Post by: Silverdream on 01 December 2011, 03:27:09 pm

Top job Topgun... :thumbup

t'is a job on my long list to do..

Gotta get carbs off for a jet kit so will do them then..

Nice to know others have the same jobs to do ...  :lol

Title: Re: Carb inlet rubbers all cracked up
Post by: BIG MAC on 03 December 2011, 10:33:21 pm

Its a piece of piss other than the throttle cables

Title: Re: Carb inlet rubbers all cracked up
Post by: topgun44 on 04 December 2011, 12:23:23 pm

Quote from: BIG MAC on 03 December 2011, 10:33:21 pm

Its a piece of piss other than the throttle cables

throttle cables did not take off left them on the carbs  ;)