1
FZS600 Fazer / Re: Cam chain rattle question
« on: 11 November 2022, 06:45:00 pm »
did you reset the tensioner to full extension before reinstalling (releasing it all the way back out)
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 1
FZS600 Fazer / Re: Cam chain rattle question« on: 11 November 2022, 06:45:00 pm »
did you reset the tensioner to full extension before reinstalling (releasing it all the way back out)
2
FZS600 Fazer / Re: Spraying the engine in situs« on: 11 November 2022, 06:07:52 pm »
as darcy showed - it can e done - just remember it is all in the prep work- and if you need to pull the engine apart it will need done again as it will crack on mating surfaces
-- yes im back again as finally got a new laptop after the dog decided to knock a drink over the old one - really missing riding a fazer 4
FZS600 Fazer / Re: Grabrail delete bungs?« on: 16 September 2021, 01:01:45 pm »
i just used some blanking grommets didnt look to bad even in black.
5
FZS600 Fazer / Re: Identifying part help.« on: 30 August 2021, 12:57:28 am »
might be a good time to update where you are from - bunch of good guys/gals on here that might be local to you and willing to have a look
--DONT HIT IT WITH A HAMMER - ITS NOT A FIESTA 6
FZS600 Fazer / Re: Clicking noise from rear wheel« on: 29 August 2021, 03:05:53 pm »
any joy on figuring it out ????
7
FZS600 Fazer / Re: Identifying part help.« on: 29 August 2021, 03:04:28 pm »
might sound an od question but this is an odd breakdown situation
does your neutral light still work. ?? 8
FZS600 Fazer / Re: Clicking noise from rear wheel« on: 16 August 2021, 11:25:29 am »
make sure you check the sprocket carrier bearing aswell - it caught me out once and i bought a new chain sprocket before noticing.
https://youtu.be/TsmS4rhSA1c?t=107 98-03 carrier bearing - 6206-2rs (make sure it is a 2rs for longer life as its sealed on both sides) 9
FZS600 Fazer / Re: Loose front sprocket nut...« on: 29 June 2021, 05:19:28 pm »
surely everyone has the new nut by know, lucky find as could have ended badly
10
FZS600 Fazer / Re: Maintenance on forgotten bike« on: 18 May 2021, 07:08:14 pm »
bit late to winterise after 5 years,,, real riders ride through every season
11
FZS600 Fazer / Re: Maintenance on forgotten bike« on: 18 May 2021, 02:13:11 pm »Hi there! first remove the plugs and put a little oil in there , take the side cover off and spin the motor by hand first, many will say this is over kill but as its been five years there is always a possibility of a valve being stuck and you dont want a high speed piston smashing into it. then use the starter to spin it a few times to get some oil moving around because that head will be dry as a desert. if all is fine then fire those plugs back in and give her a whirl with fresh fuel (preferred high quality as it has cleaning additives). good luck 12
FZS600 Fazer / Re: Petrol pouring out of carb overflow ?« on: 02 May 2021, 05:44:26 pm »
yep sounds like either the float level tab has been bent off level or the float valve and body needs replaced
13
FZS600 Fazer / Re: Petrol pouring out of carb overflow ?« on: 02 May 2021, 04:36:07 pm »New pump fitted carb float valve stuck stand upright and give a few god taps with a screwdriver handle or something, was a common problem on methanol speedway bikes back in the day if it still keeps happening then carbs out time or at least the float bowl if you can get in there 14
FZS600 Fazer / Re: Dead Battery?« on: 28 April 2021, 01:56:21 pm »
its the engine off thats the important one that was more for my little notebook :-)
15
FZS600 Fazer / Re: Dead Battery?« on: 28 April 2021, 11:01:17 am »
one more test to be done is a parasitic draw test but may need a few others to give there readings aswell as small draws are to be expected by the clock, alarm etc
disconnect the battery +terminal and put a multimeter between and see how many milliamps are being drawn with ignition on and ignition off with lights heated grips etc off obviously if anyone else does this please note which alarm system you have fitted haynes manual says there should be a current leakage of 1mA (max) but that doesnt include alarm if fitted but i can probably find out the draw if i know the alarm model, 16
FZS600 Fazer / Re: Technical name / engine caps« on: 27 April 2021, 09:40:00 am »
blanking grommets would work aswell but obviously need to be more accurate on the measurements
17
FZS600 Fazer / Re: Technical name / engine caps« on: 27 April 2021, 09:38:30 am »
just search on ebay for 'rubber bungs' you will start to remember school days and chemistry class but you should be able to find some large ones
19
FZS600 Fazer / Re: Fuel pump relay« on: 25 April 2021, 02:23:44 pm »
part no. 4YR8194000 or 4YR8194001 4YR8194002 [/size][size=1.14286rem](superseeded part number)[/size]
fazer600 obviously fzs1000 xv1700 roadstar fjr1300 06-07 tdm900a 05-09 vp125 xt1200 yp125r they should have the same relay (so fowlers and cmnsl tell me) 20
FZS600 Fazer / Re: fuel gauge fault« on: 01 April 2021, 11:26:36 am »its in the bottom of the tank.exactly what i was gonna say, make sure all the connectors are clean, sometimes even just disconnecting and reconnecting can fix problems. a can of electrical contact cleaner is a handy thing to have laying around 21
FZS600 Fazer / Re: Fazer 600 Camchain knock« on: 10 March 2021, 10:11:22 pm »
can we please pin a camchain convo-- i love to see new questions come up but this one comes up far too often
22
FZS600 Fazer / everyone should bookmark this site« on: 28 February 2021, 01:39:36 pm »
click the link and go to your model then bookmark
its the easiest way to find part numbers etc and for the expensive stuff that is harder to get 2nd hand you can cross reference other bikes that use the same part and widen ebay searches (not a huge problem for the fazer but has come in handy for my 82 gsx1100 and godsons ybr125) https://www.cmsnl.com/yamaha-fzs600_model35432/ 24
FZS600 Fazer / Re: Yamaha fazer fzs 600 cuts out when clutch lever is released.« on: 24 February 2021, 07:07:36 pm »Is your clutch cable adjusted properly at both ends?if its wasnt correctly set then it would THUD , lurch and stall not just cut out when putting in gear, certainly an electrical issue as its a combo of safety cut out switches not opening/closing a circuit 25
FZS600 Fazer / Re: In line fuel filter FZS600« on: 24 February 2021, 07:03:43 pm »£4.80 on Wemotoi wondered on the +postage on that and shit myself at £15 postage then realised it thought i was in india lol £0 postage in uk and i did used to use them a lot when i had my honda bros so an A+++ company |