Date: 17-05-24  Time: 21:54 pm

Author Topic: MOT question  (Read 2006 times)

ghostbiker

  • Muck Spreader
  • GP Hero
  • ******
  • Posts: 3,437
    • Main bike:
      FZS 1000 Gen1
    • - GSX600F Katana
    • View Profile
MOT question
« on: 29 June 2013, 10:28:30 pm »
Playing with a beat up Zx6r and gunna try a mot on it.
Done pretty much all the mot work now apart from its front mudguard is smashed.
Now with the 1998 Zx6r the front fairing hangs a long way over the wheel.
Is a front mudguard a must for mot (got one on way but will be a week or so) or can I get away with out it.

jon

  • FOC-U Crucifixion Consultant
  • GP Hero
  • ******
  • Posts: 3,264
    • Main bike:
      Other
    • - CRF250L, Stage 1 tuned
    • View Profile
Re: MOT question
« Reply #1 on: 29 June 2013, 11:07:14 pm »
Plenty of custom chops and harleys out there with no front muddie, unless they take them off after the mot.

jon

  • FOC-U Crucifixion Consultant
  • GP Hero
  • ******
  • Posts: 3,264
    • Main bike:
      Other
    • - CRF250L, Stage 1 tuned
    • View Profile
Re: MOT question
« Reply #2 on: 29 June 2013, 11:09:41 pm »
And what about dirt bikes? The muddie on them is mounted right up under the front light, about 2 foot away from the actual wheel

solorider

  • WSB Pack Hound
  • *****
  • Posts: 717
    • Main bike:
      FZS 1000 Gen1
    • View Profile
Re: MOT question
« Reply #3 on: 29 June 2013, 11:24:47 pm »
looking in the MOT manual there is not a lot mentioned about mudguards except for this
Some               fork arrangements rely on the bracing incorporated in the               mudguard fixings to maintain their alignment. A mudguard insecurely               fixed to the forks may therefore adversely affect the handling of               the machine
Check the security of the front mudguard and look for evidence               of it having been in contact with either the wheel, the tyre or               any fixed part of the machine.
and in the failure section
An insecure mudguard or one able to easily contact the wheel,               tyre or any fixed point of the machine.
 
 
 

ghostbiker

  • Muck Spreader
  • GP Hero
  • ******
  • Posts: 3,437
    • Main bike:
      FZS 1000 Gen1
    • - GSX600F Katana
    • View Profile
Re: MOT question
« Reply #4 on: 29 June 2013, 11:37:48 pm »
Hmm, as its just plastic and no brace at all think I will try and see if it pass's
Just need to get a Reg plate and it should be mot time :)

rustyrider

  • GP Hero
  • ******
  • Posts: 1,057
    • Main bike:
      FZS600 98-99
    • View Profile
Re: MOT question
« Reply #5 on: 30 June 2013, 08:52:03 am »

jon

  • FOC-U Crucifixion Consultant
  • GP Hero
  • ******
  • Posts: 3,264
    • Main bike:
      Other
    • - CRF250L, Stage 1 tuned
    • View Profile
Re: MOT question
« Reply #6 on: 30 June 2013, 08:54:32 am »
I've got a feeling that they are like lights on a bike and spare wheels in a car. If they are fitted then they have to work properly. If they aint fitted they aint tested (although you get an advisory for lights on a bike not to ride it in anything but perfect visibility - a so called daylight mot).

robby boy

  • WSB Pack Hound
  • *****
  • Posts: 914
    • Main bike:
      Other
    • - Triumph Sprint ST 1050
    • View Profile
Re: MOT question
« Reply #7 on: 30 June 2013, 06:24:55 pm »
Might be worth asking the testing station if he would pass or fail it before putting it in.
If you worried about falling off your bike, you'd never get on.

ghostbiker

  • Muck Spreader
  • GP Hero
  • ******
  • Posts: 3,437
    • Main bike:
      FZS 1000 Gen1
    • - GSX600F Katana
    • View Profile
Re: MOT question
« Reply #8 on: 30 June 2013, 11:16:50 pm »
I'm working all week so dropped it off tonight. Will see if it passes Tuesday or not.
Np if it fails, free retest and new mudguard should be here by the weekend.

Mind you it has no Reg plate either :P but that should be here Tuesday :)