Balanced the carbs on the mighty thou.......only took 2 days
gave the mighty thou a service the other evening and noticed it was a little bit lumpy on tick over, not balanced the carbs for a while so out with the gauges and sure enough no 2 is way out...bit surprised at that so I connected each gauge in turn to no1 cylinder and adjusted them to all read the same, not a lot in it just a tweek here and there, no 2 still as photo.after a fair bit of adjusting I finally got them right.........but the bloody thing wouldn't tick over, idle adjustment screw has always been a bit vague, gettin late so left it at that...in bits, and playing on my mind
Up early this morning with all day to sort it out, that reading on no2 was bothering me and started to think I had a dodgy plug, not replaced them since I bought it 3 years ago, approx 12000 miles, so bought a new set....no change.......
Check the gauges again ....out and sticking
......theres a screw valve on each of the vacuum hoses on the gauges that restrictes the flow and keeps the needle stable.loosed all four off so the needles were just flickering, just so I know they are not sticking...
Re-balanced the carbs, set the idle and BINGO...running nice and smooth.cracking the throttle open to the stop from idle and I get an instant responce,happy with that
reds top tip of the day..........check you equipment, twice