Date: 21-05-24  Time: 12:30 pm

Author Topic: Clutch problems.....  (Read 1406 times)

Trip

  • Cager in Training
  • Posts: 3
    • View Profile
Clutch problems.....
« on: 03 April 2016, 10:25:05 pm »
I'm sat in an AA van as I write this, I passed my test last August and went out and bought an 03 fazer which I instantly fell in love with.

Today however she's breaking my heart.

Riding along my and the clutch lever wouldn't work, I could move it but it was loose and not doing what a clutch lever should.... Thinking the cable must have snapped I killed the engine and pulled over, as I did so, I saw a big pool of oil appear below the gear lever.

Any thoughts as to what  this could be?
Any help or advice would be appreciated!
« Last Edit: 03 April 2016, 10:44:00 pm by Trip »

Deefer666

  • GP Hero
  • ******
  • Posts: 7,720
  • Loves to hit stuff with hammers!
    • Main bike:
      Other
    • - FJ1200
    • View Profile
    • Motorcycle Republic
Re: Clutch problems.....
« Reply #1 on: 03 April 2016, 11:32:27 pm »
Sounds like a problem with the clutch push rod where it goes into the engine under the front sprocket housing... Are you sure the chain hasnt snapped?
Owner of Motorcycle Republic, Specialist in unfucking things that others have fucked up.

Trip

  • Cager in Training
  • Posts: 3
    • View Profile
Re: Clutch problems.....
« Reply #2 on: 03 April 2016, 11:48:13 pm »
Thanks Deefer,
No I'm not 100% certain, but would this cause an oil leak? I'm not talking a couple of drops, this was a puddle (all over by back wheel too ! 😕)

Bretty

  • WSB Pack Hound
  • *****
  • Posts: 753
    • Main bike:
      FZS600 00-01
    • View Profile
Re: Clutch problems.....
« Reply #3 on: 04 April 2016, 08:50:52 am »
I've had something similar happen to me on a long ride back from Hamburg.

My scottoiler ran dry, chain stretched, jumped a tooth on the front sprocket and hit the push rod, snapping it and dislodging the seal. I don't remember a lot of oil coming out though? But this would be my guess.
-suck-squeeze-bang-blow-

Deefer666

  • GP Hero
  • ******
  • Posts: 7,720
  • Loves to hit stuff with hammers!
    • Main bike:
      Other
    • - FJ1200
    • View Profile
    • Motorcycle Republic
Re: Clutch problems.....
« Reply #4 on: 04 April 2016, 09:00:50 am »
I've had something similar happen to me on a long ride back from Hamburg.

My scottoiler ran dry, chain stretched, jumped a tooth on the front sprocket and hit the push rod, snapping it and dislodging the seal. I don't remember a lot of oil coming out though? But this would be my guess.


Tha'ts what I'm thinking... take your sprocket housing off and in front of the sprocket you should see a rod coming out of the engine, if there is just a hole that is leaking oil then your chain has either snapped or jumped and knocked the top off of the clutch push rod. I have also seen this happen when the front sprocket retaining nut has failed.

Owner of Motorcycle Republic, Specialist in unfucking things that others have fucked up.

Trip

  • Cager in Training
  • Posts: 3
    • View Profile
Re: Clutch problems.....
« Reply #5 on: 10 April 2016, 05:34:00 pm »
Thanks for the input guys, you were quite right, it was a sheared push rod.  Chain was intact though.