image

Fazer that's for sale

Fazer that's for sale

Daytona

11 once all wiring was connected I placed the Digi face on the instrument pannel, replaced all connections to back of instrument pannel & tested by turned on the electrics Then off to programme the unit

10 Do not over do it with the rubber & electrical tape

9 Now take small peice of rubber tape and gently stretch it then wrap round soldered wiring tightly Then wrap in eletrical tape

8 I used pegs to splitt my sourced wiring and at the same time it protects all the wires your not working on

7 Removed electrical tape to expose wiring My wiring all had green bands on them that I took as a factory Identification for the year 2003 I also used light brown as Live feed

6 Remove front screan and side fairing Main fairing can stay on (fox Eye) Pull rubber protector to expose connector to instrument pannel It takes some wiggling to get off while releasing push in lock

5 strip outer sheith and seperate Orange wire as this is required to programme Wrap Rubber tape (after streaching) length of strand leaving enough to double back on self Cover with electrical tape

4 Exspose 5mm of bare wire on each strand and solder but do not solder Orange wire

3 Digi as it comes You may want to wait to see how much Digi wire is required before sep 4 & 5 Dependent on placement

2 The Box, Tools, Haynes, Eletrical, Rubber and masking tape, soldering iron & solder Solder sucker upper

2 The Box, Tools, Haynes, Eletrical, Rubber and masking tape, soldering iron & solder Solder sucker upper

1 Box content

1 Box content

IMAG0382 1036256545

2 March 13 stocky

Please I need to ride her

Begging to be out on the road

OK, so pollishing is a fetish of mine

OK, so pollishing is a fetish of mine

Just cleaned

Just cleaned

Spoilt for choise at training school

98cfb9c9 cd73 450e afe7 828372e30cc5

focu challenge fountain 001

Hi

Hi