1
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
FZS600 Fazer / Out for a ride« on: 13 November 2016, 10:03:19 am »
Just got kitted up and ready for a ride maybe to the ponderosa, maybe delemere, will see, so see you out there guys
Paul 3
FZS600 Fazer / Re: Helmet cam« on: 12 November 2016, 12:10:55 pm »
Thanks guy was looking at between £20 to £30 for one as on Amzon and Ebay incase it get messed up or broken then not to expensive to re place
I understand paying for qualiity but just after a basic cam but the Gopro's do look good though Paul 4
FZS600 Fazer / Helmet cam« on: 12 November 2016, 10:42:32 am »
Does any one on here recomend a helmet cam and if so , how much and where from and how do they fit etc, as I am looking to getting one for future trips on the Fazer and even the bike with no engine just pedals ............................................!!!!
thanks guys Paul 5
FZS600 Fazer / New screen fitting« on: 08 November 2016, 06:39:45 pm »
I have bought an after market dark screen fo rmy 03 Fazer and I just wondered is it hard to fit and is there an how to ? to fit it or is it a simple job to do
to remove the old one and fit the new one thanks again guys Paul 6
FZS600 Fazer / Re: Spark plugs« on: 08 November 2016, 04:05:26 pm »
Well thanks guys for all the comments will check them at the weekend now with the proper tool from the tool kits
Paul 7
FZS600 Fazer / Spark plugs« on: 06 November 2016, 11:33:29 am »
Now forgive this question but never had a Fazer before my last bike was a Blackbird, but do you need to remove the tank on the fazer to get the plugs out to check them
and /or change the air filter still waiting for my Haynes to come in the post Thanks guys Paul 8
For Sale & Wanted / Re: yamaha fazer 600 5dm parts for sale« on: 05 November 2016, 01:47:02 pm »
no probs ....
9
For Sale & Wanted / Re: yamaha fazer 600 5dm parts for sale« on: 05 November 2016, 08:51:22 am »
Hi how much for the rear disc and would it fit an 2003 600 posted to Chester
thanks Paul 10
FZS600 Fazer / Re: Carb balancing« on: 04 November 2016, 09:28:05 pm »
Thanks guys will keep an eye out for a decent set as its always good to have a tool for the job, and I think I need to invest in a workshop manual but need to look at doing a few
things to her this weekend now she has a full Mot ticket Paul 11
FZS600 Fazer / Carb balancing« on: 04 November 2016, 07:01:05 pm »
Just a quickie on how much would it be to have my carbs balanced, or for a kit to do the job myself ?have tried a google on this with varried results
but how much have peep on here paid to have it done, or is there someone close to Chester with a kit that could come and show me how to do it thanks Paul 12
General / Re: Down pipes« on: 03 November 2016, 07:05:46 pm »
look good celticdog may be tempted to get some but MOT on friday after noon if it passes may buy her a pressie
Paul 13
General / Re: Top end rattle« on: 03 November 2016, 07:02:32 pm »
Thanks again guys, it is defo a ticking noise not a rattle, a bit like a sewing machine, but does seem to ease as the engine gets warmer so may leave it for a while see if it gets worse
have now done the TPS check and that was out so now set to 5000 rpm, engine runs a bit better now, and ready for its MOT Friday afternoon so fingers crossed...... Paul 14
General / Re: Top end rattle« on: 02 November 2016, 04:44:06 pm »
Right guys and thanks for the replies I have it on good authority that it is the cam chain "tickling" now question is do I leave it for a while, try a thicker oil, or save up and arm and a leg and get it done, thing is does anyone know sort os approx how I am looking at getting the chain done carbs balanced.
thanks Paul 15
General / Re: Down pipes« on: 01 November 2016, 07:51:31 pm »
Carbon end can, and a black hugger, with a rad grille will make it a smart bike
Paul 17
Introduction / Re: hi Guys« on: 31 October 2016, 06:57:44 pm »
thanks well it had to be red as its my fav colour and of course the fastest, bestest colour, I have now painted the down pipes Black as they were looking old stained and discoloured
so to save a lot of time and money trying to polish them back up I thought black was the easy option, and they look fine now Paul 18
General / Re: Down pipes« on: 31 October 2016, 06:51:57 pm »
Down pipe now all painted with heat resist Black paint and polished the rest of the bike looking good now
Paul 19
General / Top end rattle« on: 31 October 2016, 06:15:03 pm »
Not really noticed it before but went to start my 2003 Fazse 600, and when it burst into life there was a defo load ish ticking comming for the top of the engine, the bike has done 40,000 but been well looked after is this something I should be worried about only gets a bit quieter when fully warm but not completelty
thanks guys Paul 20
General / Rear Higger« on: 31 October 2016, 05:52:19 pm »
No sure if in the right place but, has anyone got a rear hugger knocking about anywhere, preferable in black, but as long as it can be painted then great need one for my
2003 Fazer 600 also looking for as cheap as poss and close ish to chester so could collect or pay postage. thanks Paul 21
FZS600 Fazer / Hugger« on: 30 October 2016, 05:41:42 pm »
Anyone selling a hugger for a 03 fazer 600 got to be black
thanks Paul 22
General / Down pipes« on: 30 October 2016, 01:53:22 pm »
Hi Guys just wondered, as my Fazer has the stainless down pipe which are stained, would it be ok to Paint them black with heat resistant paint ?
as I have had no succsess in trying to clean them up thanks guys, alos a pic of my Fazer is in my thread in the welcome section Paul 23
Introduction / Re: hi Guys« on: 30 October 2016, 01:48:31 pm »
This is my new stead hope the pics come out ok
24
Introduction / Re: Hello all« on: 30 October 2016, 01:03:52 pm »
Red is defo the fastest though any way glad you like it have fun
Paul 25
Introduction / Re: hi Guys« on: 30 October 2016, 01:00:57 pm »
Hi guys thanks for the welcome and just been out on the fazer for about 2 hours really love it so easy to ride and handle compared to the Bird I had I think I am going to realy like this bike
Paul
Pages: [1] 2
|