Date: 19-04-24  Time: 08:40 am
« previous next »
Pages: [1]

Author Topic: Back brakes problems  (Read 1899 times)

Stainless_Titanium

  • CBT Wobbler
  • *
  • Posts: 28
  • Chain stretcher
    • Main bike:
      FZS600 00-01
    • - Triumph Speed Triple 955i
    • View Profile
Back brakes problems
« on: 21 April 2014, 03:04:05 pm »
Hey, just been workin on my fazer's back brake, of which the pads are dead (no biggy) and the pistons are seized in (big biggy), so had a look at google for prices of new pistons to find some of the topics on the old site about fitting a Fazer 1000 caliper of the same age to the back of the bike.


Currently crawling ebay for one but just a wonder if it was still worth a shot as I'm lookin at about £100 probs to sort out the caliper i currently have if i can pull the bastard pistons out.


cheers
Logged
2001 Yamaha FZS 600 S Fazer
2000 Triumph Speed Triple 955i

dBfazer600

  • WSB Pack Hound
  • *****
  • Posts: 575
  • I is Zedonk
    • Main bike:
      FZS600 02-03
    • View Profile
Re: Back brakes problems
« Reply #1 on: 21 April 2014, 07:14:55 pm »
Had mine seize in and the pads were shocking so I left them in and popped the lid on the hydraulic reservoir. It took a hammer and chisel and a few hours to free them up then stripped down and clean put them back as seals were good.

It was the crud on the exposed area of the piston and onto the caliper that made mine seize. No idea about fitting a Fazer 1000 caliper

Daz
Logged
She Ain't Exactly Pretty, She Ain't Exactly Small, Fourt'two Thirt'ninefiftysix

You Could Say She's Got It All.

Stainless_Titanium

  • CBT Wobbler
  • *
  • Posts: 28
  • Chain stretcher
    • Main bike:
      FZS600 00-01
    • - Triumph Speed Triple 955i
    • View Profile
Re: Back brakes problems
« Reply #2 on: 21 April 2014, 08:35:28 pm »
well, after more reading and finding the part, IN THE STATES, i think i have enough details to do the upgrade really. Tempted to go for it really as of the cost of rebuilding the caliper
Logged
2001 Yamaha FZS 600 S Fazer
2000 Triumph Speed Triple 955i

unfazed

  • GP Hero
  • ******
  • Posts: 5,323
  • Never ride faster than your guardian angel can fly
    • Main bike:
      FZS600 02-03
    • - FZS1000 05-06, Serow 2000
    • View Profile
Re: Back brakes problems
« Reply #3 on: 21 April 2014, 09:18:55 pm »
Use WD40 around the piston edge to soften the crud and then watch this
Brake caliper piston removal trick

I have used this method with a small compressor a few times and it works well.
I have also used an airline for a really jammed piston, but needs a lot lot more care and fingers kept well out of the way.  :eek
« Last Edit: 22 April 2014, 07:33:47 am by unfazed »
Logged

Stainless_Titanium

  • CBT Wobbler
  • *
  • Posts: 28
  • Chain stretcher
    • Main bike:
      FZS600 00-01
    • - Triumph Speed Triple 955i
    • View Profile
Re: Back brakes problems
« Reply #4 on: 21 April 2014, 09:48:32 pm »
yea...my caliper isn't that clean anymore :P cheers thou I'll look into this
Logged
2001 Yamaha FZS 600 S Fazer
2000 Triumph Speed Triple 955i

humbucker88

  • DAS Born Again
  • **
  • Posts: 99
    • Main bike:
      FZS600 98-99
    • View Profile
Re: Back brakes problems
« Reply #5 on: 21 April 2014, 11:25:35 pm »
I split the caliper and used a £10 portable air compressor to remove the stuck pistons, cleaned, lubed, new seals and refitted.

This one.

Logged

humbucker88

  • DAS Born Again
  • **
  • Posts: 99
    • Main bike:
      FZS600 98-99
    • View Profile
Re: Back brakes problems
« Reply #6 on: 21 April 2014, 11:28:21 pm »
That being said, if I was in the position again, I would contact these guys as they charge £39 for a rebuild, or £62 for a refurb and paint job. Didn't know about them though so can't comment on their quality of work.
Logged

Geordi Sussex

  • DAS Born Again
  • **
  • Posts: 95
    • Main bike:
      FZS600 98-99
    • View Profile
Re: Back brakes problems
« Reply #7 on: 21 April 2014, 11:30:16 pm »
I manged to score a fazer 1000 caliper off eBay for a good price
So I have a fzs600 one waiting to be sold

I had to do some fine fettling with a dremel to make it fit
Bit was easy to do
Logged
NFFN

carlos

  • DAS Born Again
  • **
  • Posts: 59
    • Main bike:
      FZS600 98-99
    • View Profile
Re: Back brakes problems
« Reply #8 on: 23 April 2014, 09:27:12 pm »
I slit the caliper body got the pots out using a pair of pliers held inside the faces the pots were replaced and the seals.
be car full to get that little seal back in place between the havles of the caliper
Logged
Pages: [1]
« previous next »