weave /wobble

[red98]

Cheers UNFAZED......dont know whats happened to MR NOG.....parhaps hes lost his bearings   

[unfazed]

Maybe he is outside looking for the spider to check the WEB site

[noggythenog]

Oh how i chortled


Sorry red.....i had to watch that bear gryls  survival thing & then things happened....n stuff............unfazed was it you that recommended me them in the first place or did you just do a search?.......im sure it was you...if it was then sorry for not remembering......bad drills really aint it.




But has red saved any money....thats what counts.......fast bike discount

[unfazed]

Yeah, it was me, but it is ok, I can handle it.

[red98]

no probs MR NOG.......fazer thou not shown on web site,have emailed them,looking at the other yam bearings its looks like there will be a small saving.£4 ish for both....if i dont get a reply by tonight i`ll order from wemoto,they have them in stock and are quick to deliver   

[nickodemon]

This is the one

http://shop.marksman-ind.com/motorcycle-bearings-bikebearingscouk-2-c.asp

Great to deal with

I used them for my r1 front end bearings. Ask for mark. Very helpful guy and they arrived the next day.

[red98]

mmmmmmmm.....look what i've got...

[unfazed]

Where is the collar/bush?

[red98]

Not included with this kit.....swing arm is a bit different to wheel spindle.wheel has center spacer and two sleeves/collars that run on the roller wheel bearing, on the swinging arm these three pieces are one.....old one was very good so I cleaned it up and re-lubed....

[red98]

Fitted the new bearings tonight.......my drift was'nt going to work, not enough room to get it in there, so I prised the rollers out and removed the plastic roller carrier from both sides I then used a length of 22mm copper tubing to knock the outer bearing casing out.....worked a treat  .......cleaned everything up and pressed the bearings in square with my hands just to get them started, I then used a sash cramp to push them all the way in, then using a scoket slightly smaller than the bearing for the last little bit
 Dropped the spindle in and no play what so ever   .....will put it back on the bike tomorrow.

[unfazed]

You just cannot beat improvisation, it's the mother of invention.

Are you going to patent that bearing tool

Are the frame rubbers covering the Spindle in good condition. Put some grease inside them to stop and water ingress and don't forget to grease the bearing covers.

Enjoy the test run tomorrow

[red98]

Pat applied for   ....this time next year I'll be a millionaire   ......yep..both caps in vgc.....will be well greased, thanks for the tip....bearing covers already fitted and packed with grease.....

[dazza]

Nice one Red,  noticed a bit of play on my swing arm the other week,  tightened up the nut and it's better but still a bit of play. Will refer to this post when I attempt mine.  Cheers.

[red98]

hi dazza....its an easy job,bearings under £30....roller bearings , so nipping your nuts is not really going to work  ...all being well i`ll have it all back together tonight and have a test ride .....

[red98]

All back together tonight and out for a test ride....very smooth and stable  .........well done CRH..for guessing correctly you have won a prize 

[red98]

All back together tonight and out for a test ride....very smooth and stable  .........well done CRH..for guessing correctly you have won a prize 

[unfazed]

And the prize is the old set of swinging arm bearings

Another happy foccer

[CRH]

All back together tonight and out for a test ride....very smooth and stable  .........well done CRH..for guessing correctly you have won a prize 

....kin hell paul"...thats some lawn ya got there matey? ....yes thanks for the applause" ....think i deserve at least a fkn towbar though?...cus ya never sent me my last prize" after i diagnosed ya stuuter!!!!! .....

[red98]

yesssssss you lucky foccer....the towbars yours    .........not sure you diagnosed the stutter or not  ...i`ll go back and re-read the "stuttering thread" and see.........see you in a couple of weeks 




took that picture last night 9.30 at local park whilst on my test ride......poor quality as taken with phone and not much light.......thou looks good though  [size=78%] [/size]